Talking skull platf...
 
Notifications
Clear all

Talking skull platform ideas needed

15 Posts
9 Users
0 Reactions
9,135 Views
LightUpMA
Posts: 208
Topic starter
(@lightupma)
Estimable Member
Joined: 15 years ago
[#20273]

I am doing Halloween for the first time and just bought a talking skull that will be connected to a mic. The mouth will move to my words live or using a recording.

I'm thinking of using software to change my voice and talk to the TOTs. What do people put their skulls on?? Before anyone says it I don't have tons of cash for a skeleton body - my budget is fairly tied up in pixels and 2100 channels of controllers.

It weighs about 5 or 6 lbs typical Bucky skull with scary terry servo controller. Any and all ideas are appreciated!!

Thanks!


14 Replies
Posts: 4
(@palmdale-haunter)
New Member
Joined: 15 years ago

You might try constructing a PVC framework and covering it with a reaper style cloak (you can make that too if you want)...


Reply
gdyrdave
Posts: 916
(@gdyrdave)
Noble Member
Joined: 16 years ago

How about a cheap lazy susan for the skull to look from side to side.Working on 2 now.

Dave


Reply
LightUpMA
Posts: 208
Topic starter
(@lightupma)
Estimable Member
Joined: 15 years ago
Palmdale Haunter wrote:You might try constructing a PVC framework and covering it with a reaper style cloak (you can make that too if you want)...

PH, I like your idea...esp since I have some unused pvc sitting in the basement.

gdyrdave wrote:How about a cheap lazy susan for the skull to look from side to side.Working on 2 now.

Dave

Dave, what are you using to move the lazy susans? I've seen some people working on 3 axis skulls controlled by servos and connected to a servo controller or arduino - all controlled by vixen. The problem is I have opted to go with a Scary Terry servo controller which takes an audio input and moves the mouth only. I don't know about further movement, and am new to this arena. If you have pics of how you do this, I'd love to see!


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

You can easily just stuff a pair of pants and shirt with leaves for the body. You could hold the head on with a coat hanger, inserted into the leaves. To hold this guy up, just set it in a lawn chair.

You probably already have a beater pair of pants and shirt and who doesn’t have leaves? The cost is either free or close to it.


Reply
gdyrdave
Posts: 916
(@gdyrdave)
Noble Member
Joined: 16 years ago

I am using the renW SERVO Dirknerkle has and using vixen channels to move the jaw and left to right using standard rc aircraft servos. Using the ball bearing lazys makes it pretty easy to turn. As far as up and down is a different story because if the weight factor. I just chose to go left and right wit the cheap skulls I got from walmart. I used audicity to record a track for the vocals. See this thread... http://doityourselfchristmas.com/forums/showthread.php?17329-Jaw-sequencing-an-easier-way!&highlight=skull+output


Reply
LightUpMA
Posts: 208
Topic starter
(@lightupma)
Estimable Member
Joined: 15 years ago
ErnieHorning wrote:You can easily just stuff a pair of pants and shirt with leaves for the body. You could hold the head on with a coat hanger, inserted into the leaves. To hold this guy up, just set it in a lawn chair.

You probably already have a beater pair of pants and shirt and who doesn’t have leaves? The cost is either free or close to it.

Free is good!!! Plus it gives me room to hide the controller under the chair


Reply
Posts: 71
(@halstaff)
Trusted Member
Joined: 17 years ago

Check out this video of a haunt greeter I built for a friend -

I used a jaw/servo audio board I designed using a Picaxe but the video also shows the body build and how I added side to side movement for the head.


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

I just used 4 inch PVC for the body of mine. The bottom is connected to plywood by screwing an endcap on it and the top has a length of 1 inch PVC going throu it for the shoulders. The skull connect to a cap I just slide on the top of the 4" PVC. Last I just slipped a grim reaper type costume on him to cover it up.


Reply
Greg in Canby
Posts: 854
(@greg-in-canby)
Prominent Member
Joined: 19 years ago

For skull movement, I'm asking for this

http://triaxialskulllabs.com/webstore/product_info.php?products_id=62

http://triaxialskulllabs.com/webstore/popup_image.php?pID=62

For my birthday.

As for suggestions, PVC and stuffed cloths may be the cheapest/easiest.

Greg


Reply
Page 1 / 2
Share: