64x64 pixel array u...
 
Notifications
Clear all

64x64 pixel array using WS2812B LEDs

25 Posts
10 Users
0 Reactions
9,091 Views
moondew
Posts: 53
Topic starter
(@moondew)
Trusted Member
Joined: 13 years ago
[#31218]

64x64 pixel array using WS2812B LEDs
http://www.moondew.com/pixels/array64/

No technical details on the web site at this time. It uses sixteen 16x16 flexible panels available from Ray Wu and four ECG-P2 controllers from Joshua Systems. The software is my own written in C++.

I will post technical details on the web site if there is any interest.

-Tom


24 Replies
Posts: 1133
(@toozie21)
Noble Member
Joined: 19 years ago

Very cool. What are you using for a diffuser? You like having it better than the straight pixels?


Reply
Robo
Posts: 1494
 Robo
(@robo)
Noble Member
Joined: 14 years ago

Wow, What a great first post! Welcome to DIYC.com!


Reply
moondew
Posts: 53
Topic starter
(@moondew)
Trusted Member
Joined: 13 years ago

The diffuser makes a huge difference in being able to make out what is being displayed. The side effect is that it is also easier to photograph.

This is what I use for the diffuser.
http://www.acrylite-shop.com/US/us/acrylite-optical/rear-projection-kekooe70r5b.html

It works best if it about 1/10" away from the pixels so I use a clear sheet of acrylic as a spacer.
http://www.acrylite-shop.com/US/us/extruded-f0p5v3qaql1/acrylite-extruded-ff-colorless-0a000-gt-d8f4x4y2gip~p.html

-Tom


Reply
moondew
Posts: 53
Topic starter
(@moondew)
Trusted Member
Joined: 13 years ago

Two of my previous pixel projects:
http://www.moondew.com/pixels/


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

That is Awesome, the diffuser makes all the difference in the world!!

Great Job, going to have to try that on mine!!


Reply
Posts: 1133
(@toozie21)
Noble Member
Joined: 19 years ago
moondew wrote:The diffuser makes a huge difference in being able to make out what is being displayed. The side effect is that it is also easier to photograph.

This is what I use for the diffuser.
http://www.acrylite-shop.com/US/us/acrylite-optical/rear-projection-kekooe70r5b.html

It works best if it about 1/10" away from the pixels so I use a clear sheet of acrylic as a spacer.
http://www.acrylite-shop.com/US/us/extruded-f0p5v3qaql1/acrylite-extruded-ff-colorless-0a000-gt-d8f4x4y2gip~p.html

-Tom

Very interesting, thanks for the details Tom. Now I am contemplating this for my matrix I am working on..... Do you use the 45% transmission version (the more expensive one on the left) in that link you sent? And I assume that if I have a natural gap already (I am using pixel strips in the weatherproof tubing) that there is no need to add the clear sheet (since it is a spacer), right?


Reply
moondew
Posts: 53
Topic starter
(@moondew)
Trusted Member
Joined: 13 years ago

When I have a chance I will post a couple photos on the website without the diffuser.


Reply
moondew
Posts: 53
Topic starter
(@moondew)
Trusted Member
Joined: 13 years ago

Yes, I used the 45% transmission version because the pixels are too bright to start with. I originally bought 1 sq ft just to see how it worked.

The acrylic tends to warp from the heat of very bright pixels. That is why I used a full clear sheet as a spacer rather than only using a spacer around the edges. Once I attach it around the edges the spacer will not allow it to warp toward the pixels in the center. That is the hope anyway.

I power the pixels with 3.3v instead of 5v. The pixels are way too bright at 5v with the result being that you must dim them in software. This effectively reduces your color space. But operating them at 3.3v makes them naturally a bit dimmer.

These LEDs also draw way too much current at 5v if you have them very bright. At 3.3v it reduces the current to about 1/2 that at 5v. It also reduces the heat. At 5v full white intensity they get hot enough to smell. At 3.3v they only get hot enough to warm your hands.

I use 3.3v / 25amp buck converters mounted on the back of the array to provide power. This allows me to place a 35v power supply many feet away without have to worry about voltage drop. At 3.3v full white intensity it draws about 80 amps. On the 35v side this translates to less than 10amps. Ray Wu was able to find me the buck converters and he now has them on his website under Electronics.
http://www.aliexpress.com/store/group/Electronics/701799_253928122.html

The WS2812B is rated to operate down to 3.5v but the only buck converter options are 3.3v or 3.7v. Since I wanted the brightness/current as low as possible I went with 3.3v and I have not had any problems.


Reply
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago

Tom:

Welcome to the forum.

Also: I think I spent more time looking at your train pictures than the electronics stuff, but that's just me. FWIW, I was at Railfair 2001 as well.

\dmc


Reply
Page 1 / 3
Share: