Ramp/Fade function
 
Notifications
Clear all

Ramp/Fade function

7 Posts
4 Users
0 Reactions
3,350 Views
Posts: 78
Topic starter
(@john-benedict)
Estimable Member
Joined: 19 years ago
[#8941]

Is there a shortcut in Vixen that whould allow you to select a time byte and use a keyboard shortcut to do a ramp-in/fade out all at once? Just curious as I bang away at the screen.


6 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Don't think so, but...... you can highlight a group of cells and press the 'R' key to ramp up, and/or use the 'F' key to fade down to 0. Don't know of one that will do up and down with one keystroke...........


Reply
Posts: 999
(@ppohlman)
Noble Member
Joined: 19 years ago

If you don't want to ramp from 0%-100%, you can use the SHIFT + 'R' or SHIFT + 'F' to do a partial ramp/fade. It will let you indicate the starting and ending values of the ramp/fade.


Reply
Posts: 864
(@deplanche)
Noble Member
Joined: 19 years ago

If you are doing the same ramp or fades numerous times, I suggest making a routine (right click to see that). Then you can load the routine, and paste from the clipboard (CTRL-V) by only selecting the first cell. Saves you from having to select the correct number of cells before using the R or F.


Reply
Posts: 999
(@ppohlman)
Noble Member
Joined: 19 years ago

Also, if you are wanting to do a faded chase, a super easy way to do it is this:

- Make sure that the "Paint from Clipboard" is checked under ... Effects -> Chase Lines.
- Copy a single fade/ramp that you want to have during the chase.
- Hold CTRL and then click and drag. A blue line will appear which represents the start of the chase line.
- Release the mouse button and a chase will appear where the blue line was with the fade/ramp as the effect.

(If "Paint from Clipboard" is not selected, only a single event will be pasted)


Reply
Page 1 / 2
Share: