Perfect Fading Chas...
 
Notifications
Clear all

Perfect Fading Chases

25 Posts
8 Users
0 Reactions
12.8 K Views
jrock64
Posts: 1099
Topic starter
(@jrock64)
Noble Member
Joined: 19 years ago
[#3439]

This was discovered thru trial and error and it almost works like Christmas magic.

I like to do lots of chases in my sequences because it makes the lights blink in a subtle pattern.
I also like to fade out at the end of a section and not just abruptly turn off.

The problem was how to fade out a chase sequence.
This will only work on a straight chase. If you are doing a trailing chase you are still on your own.

Here we go.....

Code the sequence with the chase at normal intensity into the area you want it to fade out.
Select the area of the chase you want to fade out. One you select the area do not deselect it until you are done.
Step 2 Invert
Step 2.5 Edit copy
Step 3 Partial ramp off 99 to 15. 99 is required I use 15 because at that point incandescents are effectively off.
Step 4 Transparent paste
Step 5 Find and replace 100 with 0
Step 6 Gently rub your finger along the side of you nose and prepare to be amazed.

Joel

ChaseFade

24 Replies
Virtus
Posts: 1182
(@virtus)
Noble Member
Joined: 19 years ago

jrock,
This is very clever and works, like you said, like Christmas magic. A great discovery! Thanks for sharing.


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

I have tried this and tried this, but simply can't make it happen. I am screwing up somewhere, but can't figure it out. Looks like a really neat trick too.


Reply
jrock64
Posts: 1099
Topic starter
(@jrock64)
Noble Member
Joined: 19 years ago

Sorry Wayne.
Added step 2.5 above.

Should work now.

JOel


Reply
prof
Posts: 266
 prof
(@prof)
Reputable Member
Joined: 19 years ago

Or even quicker,

Select the area to fade
Edit - Copy
Apply any ramp you like
Edit - Paste - Boolean paste - AND


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago
jrock64 wrote:Sorry Wayne.
Added step 2.5 above.

Should work now.

JOel

awesome! works for me now. Thanks!!! 😀


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago
prof wrote:Or even quicker,

Select the area to fade
Edit - Copy
Apply any ramp you like
Edit - Paste - Boolean paste - AND

That's pretty freaking cool too! Thanks!


Reply
Virtus
Posts: 1182
(@virtus)
Noble Member
Joined: 19 years ago

Prof's technique works for individual channel fading chases as well!
Select the area to fade
Edit - Copy
Apply any ramp you like
Edit - Paste - Boolean paste - AND

This will look great on leaping arches rather than the hard stop at the end of the arch.

Profs Technique

Reply
prof
Posts: 266
 prof
(@prof)
Reputable Member
Joined: 19 years ago

The fadeout using Boolean AND was something I discovered by accident a short time ago. I have attached a quick demo sequence (V 2.0 release).

After playing the sequence, if you want to see another magic trick, select all of the cells in the sequence then click on Mirror Vertically then Right Click & Opaque Paste. Then play the sequence again.


Reply
jrock64
Posts: 1099
Topic starter
(@jrock64)
Noble Member
Joined: 19 years ago

Vitrus
Looking at your jpg the first two chases look fine.
Starting at 2 seconds the third chase is not consistent.
Instead of 50% - 40% - 30% or some ratio there of for a fading chase it looks more like 50% - 20% - 40%. That middle cell is definitely not correct.

Will try profs sample later tonight.
I have never been able to get fades and boolean's to play nice together.

JOel


Reply
Page 1 / 3
Share: