Incandescent Lights
 
Notifications
Clear all

Incandescent Lights

10 Posts
6 Users
0 Reactions
4,624 Views
MacabreRob
Posts: 215
Topic starter
(@macabrerob)
Reputable Member
Joined: 15 years ago
[#16426]

Anyone know the general interval I should account for when dealing with regular incandence twinkle lights. They aren't instant on, as there is a slight delay for the bulb to go from black to full on, so what I see with the preview plugin is a bit misleading. If I can figure that out, then maybe I can anticipate for it. I am doing a "halloween face" that will be singing along with the music and don't want to let the words come out before the lights get a chance to be on...

Also, what is the ideal event period I should be using for sequencing. I am using 10ms right now, and realize that it might be a little too fast for my hardware to manage...


9 Replies
Posts: 371
(@gebbinn)
Reputable Member
Joined: 16 years ago

I believe the standard interval minimum is 25ms for incans. Your getting 40 intervals per second at 25ms, and 100 at 10ms. For most songs, 10 intervals per second (100ms) should be more than adequate.


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

I think the most common is 50ms to get 386 channels per port. The faster you go the less channels per port. Plus more sequencing boxs to fill 😉
10ms is very fast and you shouldn't be having that type of problem. How many channels are you running on that port?


Reply
MacabreRob
Posts: 215
Topic starter
(@macabrerob)
Reputable Member
Joined: 15 years ago

At most, 12. Initially I have a hacked Mr Christmas running 6 channels, but I am expanding to 12 channels when my parts arrive. Hopefully this weekend I will get my Arduino up and running and I will see how many channels I can eek out of that system.

Next year I am hoping to move to a more "normal" system with a Renard or two...


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

When you twinkle lights do mean the kind that flash by themselves? If so I always replace the twinkle bulb with a regular one so they are always on. Any desired twinkle can be controlled from vixen.
I always do my sequencing at 50ms.


Reply
MacabreRob
Posts: 215
Topic starter
(@macabrerob)
Reputable Member
Joined: 15 years ago

Twinkle as in what ppl consider Christmas lights. Not c7 or c9, but the little ones. Non-LED decorative lights.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

I've found that even with incandescent mini lights and 25ms timing, sometimes a single on/off won't happen. This is because the controller won't actually turn on the TRIAC until the next zero crossing point has past. It seems that mini lights must have power applied for at least 1 ½ cycles. If the sequence tried to turn it on in the middle of a cycle, the controller will wait until the start of the next cycle so your 25mS becomes only 16mS and this is to short. The solution was to always proceed an on with a 50% on so the output always is on for 1 ½ cycles.

This is not an issue an issue at 50mS timing.


Reply
MacabreRob
Posts: 215
Topic starter
(@macabrerob)
Reputable Member
Joined: 15 years ago
ErnieHorning wrote:The solution was to always proceed an on with a 50% on so the output always is on for 1 ½ cycles.

This probably won't work if you don't support dimming on that channel.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Personally, I don’t think that anyone but the person that sequences a song is ever going to know that the lights turn on/off 25mS earlier/later than a note in the music. I asked a few people on a song that had 50mS timing and everyone said it look right on, even when I told them where it was.

It takes longer to sequence a song at 25mS and it doesn’t appear to matter so I’m setting the minimum at 50mS. Besides, I’ve found that it seems to be less noticeable to me if the lights turn on slightly earlier than later.


Reply
Posts: 406
(@jboyles7)
Honorable Member
Joined: 17 years ago

I second that. In fact, when I listen to the music and place tick marks in Vixen where I want stuff to go, I always back them up 50ms -- it compensates for the delay in reacting to the music when you press the space bar and the illumination delay.


Reply
Share: