ANNOUNCING: MegaTr...
 
Notifications
Clear all

ANNOUNCING: MegaTreeMaker

114 Posts
40 Users
0 Reactions
68.6 K Views
Posts: 352
(@maffeirw)
Reputable Member
Joined: 19 years ago
dgirard wrote:Sorry all...if you've got it, go ahead and repost...If I find it, I'll also repost...no worrys about it.

I've not touched the code since 3.4.1, so that's the latest...and before the swarm of questions again, it only works with 2.5 (it relies on the clipboard cut/paste functionality)...if you want to use it with 2.1 you need to figure out how to paste into 2.5, then convert your sequence back down to 2.1...

Enjoy!
David

As suggested I put the zip file in the library under Other (no appropriate Vixen Category yet) under the title:

megatree maker v 3.4.1 for Vixen 2.5

had problems attaching them here but it seemed to work in the library. - enjoy


Reply
Posts: 45
(@cretx)
Trusted Member
Joined: 16 years ago

can anyone send me the mtmaker3.4.1.zip file? Seems the library is down and I cant find a working link for this.


Reply
Posts: 1372
(@fathead45)
Noble Member
Joined: 18 years ago

shoot me a email and i can send it matt @ schoolhouseelectronics.com


Reply
Posts: 24
(@holtzj)
Eminent Member
Joined: 17 years ago

I'm having trouble coping the data from mtmaker to vixen. Cut and paste like the docs talked about doesn't work for me. I looked for a way to paste into vixen and I was not able to do so.
I came up with a work around that works but, is a little of a pain in the neck.
Create a routine in vixen and open the file with a text editor. Paste the results from mt maker into the file(replace the "," with " "(space) and put a space at the end of each line. Also make sure the end of the file has a blank line. save the file as a .vir file and check that it works in vixen.


Reply
Posts: 24
(@holtzj)
Eminent Member
Joined: 17 years ago

Here is a copy of the megatree maker that I have.


Reply
Page 19 / 23
Share: