I was wondering does anyone have any old setups for 16 or 24 channels been doing some my own but being new im still learning...
Thanks in advance brandon
been there most of them are way over 24 channels and ive tried to shorten some but keep screwing up
Define "screwing up"... Many times the biggest issue is that the interval timing is different and/or you have a different Vixen version. Most of the sequences there are for version 2.1. To cut/paste between them, open up the downloaded sequence and find the appropriate music file to attach to it. Ensure the original plays correctly - most have a preview to determine this. If that's OK, then within the same Vixen instance, open a new sequence and attach the same audio to it. If you are using a profile, point it to that as well. Look for elements that match up to some degree and cut/paste them from the original to yours. You can massage this later if needed. For instance I have used what where a set of mini-trees (which I don't have) and pointed them to my SuperStrips under the eaves of my house. Totally different display item but it worked quite well in that case. Keep trying - there are several there in the 32-channel range or lower and even the higher channel ones can be cut down by focusing on specific elements. You're never going to find an exact match!
Oh - and Welcome to DIYC!
thank you thats what ive been trying but heres an issue i have i can line 24 channels up but then channel one and 2 wont do anything just stay lite so i copy/pasted other channels to 1 and 2 and still the same thing and i dont get why...
Amsamu wrote:thank you thats what ive been trying but heres an issue i have i can line 24 channels up but then channel one and 2 wont do anything just stay lite so i copy/pasted other channels to 1 and 2 and still the same thing and i dont get why...
This sounds more like a hardware problem, rather than a programming issue. Sounds like a short on channel 1 & 2.
yeah but even watchiing them in vixen there not doing anything
So.. is your preview plugin actually setup to go from channel 1 to channel 24?
Or.. perhaps it's only going from 3 to 24??
have it set 1 to 24 and one and two just stay lite
Amsamu wrote:yeah but even watchiing them in vixen there not doing anything
I am assuming that you mean you are not seeing anything in the "adjustable preview" other than lit channels. Are you running a profile or are you just adding plugins to the sequence? Are the other 22 channels operating properly in adjustable preview?
