I am putting together my first show for this year, which includes 112 channels spanning two houses that are side by side. While it is evident that pixels are very popular, I prefer the classic LED. (don't crucify me)
I needed a solution to hang lights on the windows without damaging them, as well as an easy way to store and put up each year.
As you can see from the first picture below there is a small gap between the frame and the side of the house. My plan was to make a PVC frame and a custom bracket to go over the window protrusion. I was able to bend the metal with just a vice grip. Below is what I came up with.
Materials:
1/2" PVC and fittings
Spray paint and clear coat
Aluminum strips
Drill
Rivet gun and rivets
Lights
Zip ties
I attached the brackets using rivets through the predrilled hole in the back and pipe. I put two on the top of each frame and one in the middle of each vertical pipe. 









Sent from my Pixel 2 XL using Tapatalk
MaynardFerguson wrote:I am putting together my first show for this year, which includes 112 channels spanning two houses that are side by side. While it is evident that pixels are very popular, I prefer the classic LED. (don't crucify me)
No worries there. It is actually refreshing to see someone building a new project with traditional lights.
MaynardFerguson wrote:As you can see from the first picture below there is a small gap between the frame and the side of the house. My plan was to make a PVC frame and a custom bracket to go over the window protrusion. I was able to bend the metal with just a vice grip. Below is what I came up with.
I like it. One thing though, what about wind? Will the frame swing in and out? Do you need anything to hold the frame at the bottom as well?
algerdes wrote:No worries there. It is actually refreshing to see someone building a new project with traditional lights.I like it. One thing though, what about wind? Will the frame swing in and out? Do you need anything to hold the frame at the bottom as well?
It is really tight. The brackets on the vertical pipes hold it really well. I had it sitting outside for a month before moving forward.
Sent from my Pixel 2 XL using Tapatalk
I'm glad to see someone has my same situation. I use aluminum angle to hang the pvc frames above the windows and door. They are larger than the window frame.
Have had no problems, they just hang there until I take them down. Hope this helps.
https://www.homedepot.com/p/10-ft-Vinyl-Corner-Bead-V114CB10/202093365
you put the lights onto the plastic with either Zipties or hotglue. And you make 90deg by simply cutting one side with tin snips and folding it over on itself, then gluing it to shape. A few pieces of Velcro to keep the wind from blowing it off, and you're done. Just slip it over the frame in a single piece with cord coming down the bottom.
Easy to build, Easy to install, lasts forever, cheap
