North Pole Mounting...
 
Notifications
Clear all

North Pole Mounting?

18 Posts
7 Users
0 Reactions
8,432 Views
Wolfie
Posts: 2225
Topic starter
(@wolfie)
Noble Member
Joined: 11 years ago
[#39807]

I was thinking of making some north poles out of 4" PVC. But I was wondering what folks use to mount them to the ground. I am NOT going to break out the post hole diggers.

Options?


17 Replies
Posts: 138
(@tmcteer)
Estimable Member
Joined: 15 years ago

3/8 rebar inside and tie wrapped


Reply
Posts: 191
(@mlevings)
Estimable Member
Joined: 14 years ago
CandyPoleBottom

Here is what I did. I 3d printed 2 of these bottom adapters and put one at the very bottom of the pole and a second one about 10" up from the bottom. I just slide it over a piece of rebar. I can send the .stl files if you want to print some. I also have a top adapter drawn up that I printed and used to mount the pixel noted at the top under the dome. They are very similar to what holiday coro lists on their website. Unfortunately I didn't take any pics of the poles before I mounted them outside.

CandyPoleTop

Reply
Wolfie
Posts: 2225
Topic starter
(@wolfie)
Noble Member
Joined: 11 years ago
mlevings wrote:Here is what I did. I 3d printed 2 of these bottom adapters and put one at the very bottom of the pole and a second one about 10" up from the bottom. I just slide it over a piece of rebar. I can send the .stl files if you want to print some. I also have a top adapter drawn up that I printed and used to mount the pixel noted at the top under the dome. They are very similar to what holiday coro lists on their website. Unfortunately I didn't take any pics of the poles before I mounted them outside.

Yes, I would love the STLs. I can print them on my Taz5. I like the slot on the ones on HC. I may slice a slot in your STL that will fit the boards I have. TIA for those. Why I love this board, everyone is so open and willing to share their experiences. I hope to be able to do the same for another noob that enters the hobby.

I ordered 2 of the holidaycoro ones. I wanted to see if they would fit the domes available at Home depot for about half the price of the ones from holidaycoro, and no shipping. I ordered them with the coro knife (needed it for a project). He just created the ship label so no idea on delivery date yet.


Reply
Posts: 191
(@mlevings)
Estimable Member
Joined: 14 years ago

I'm iut shopping right now. I'll post the files shortly. I also have a much cheaper option for the globes. I'll post that later as well.


Reply
Page 1 / 4
Share: