Future Direction
 
Notifications
Clear all

Future Direction

23 Posts
10 Users
0 Reactions
40.9 K Views
Posts: 2630
Topic starter
(@dynamoben)
Famed Member
Joined: 19 years ago
[#17701]

I'm currently converting my SX relay project to the Prop. Which got me thinking about the future direction of the PropController. It seems to me adoption of the PropController is hampered by its flexibility. I'm wondering if I we should start creating single purpose boards like a DMX/Renard node, or AC dimmer, DC Dimmer or a Pixel controller. We could even leverage the power of the Propeller and make combination boards like DMX, AC Dimmer, and DC dimmer all on the same board.

I still like the idea and flexibility of the current design using daughterboards and would like to see that continue, but the standalone boards might make things more approachable for those they aren't into writing their own code. (BTW one of the big reasons I created the PropController was so people could learn how to code)

Thoughts?


22 Replies
lightman
Posts: 1524
(@lightman)
Noble Member
Joined: 19 years ago

I am in. The power of the Propeller with multiple processors on one chip make it the ideal candidate for future, higher powered dimming/lighting systems.

It is a perfect candidate for DMX controlled systems, as one cog can manage addresses while the other cogs manage dimming or pixel nodes.

Daughter boards or full up boards?....whatever the masses prefer. Personally, I like single board dimmers with 8, 16, or 32 channel output drivers that directly control the lighting effect.

My 2 cents....
Lightman


Reply
Posts: 2630
Topic starter
(@dynamoben)
Famed Member
Joined: 19 years ago

Personally I need a controller that I can reconfigure since I use them one way for Halloween and another for Christmas, so that concept will live on. But I see other Prop based projects here that are being quickly adopted by people but only a handful of folks use the PropController. So I see two groups, devs and users. Devs want flexibility but users want build and play. I guess I'm wondering if we should cater to the users since there is a high learning curve between the two groups?

BTW regardless of direction all of the code a schematics will continue to be open source.

lightman wrote:
Daughter boards or full up boards?....whatever the masses prefer. Personally, I like single board dimmers with 8, 16, or 32 channel output drivers that directly control the lighting effect.

I could go as high as 128 w/o breaking a sweat.


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

Ben, to be honest, I purchased the PropController as it is a great development platform with a very very strong lighting controller bent.
I think the flexibility makes it too difficult to use as a dedicated controller.


Reply
Posts: 2630
Topic starter
(@dynamoben)
Famed Member
Joined: 19 years ago
Matt_Edwards wrote:I think the flexibility makes it too difficult to use as a dedicated controller.

So are you suggesting that dedicate purpose boards would make more sense moving forward?


Reply
Page 1 / 5
Share: