Feature Request Thr...
 
Notifications
Clear all

[Sticky] Feature Request Thread

21 Posts
3 Users
0 Reactions
51.9 K Views
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

Re: NEW - PropController Project

chilloutdocdoc wrote:When you say move the sACN code into it's own object, do you mean just copy the code over, or put it in a seperate cog then the "master"

Actually if you look at the ArtNet code you will notice that it is a self contained object, any dependencies like the WizNet driver are bundled into it. All you have to do is add ArtNet to the parent code and start making calls to it. That object gathers all the data into a buffer where that data can be retrieved (similar to the DMX object).

The sACN code isn't like that at the moment. Most of the methods are in the parent code (it was easier to develop the proof of concept that way), it would be better to have a single object, and then make calls to it from the parent. That would also make swapping between protocols easier, a single object reference change and you are done.


Reply
Posts: 789
Topic starter
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago

Just a list of all of our current feature requests for the board. I will try to keep the post updated, maybe once some of these start getting their own thread, we can link to that.

Place all feature requests in this thread?

Software:

  • Renard Input added to current driver
  • GE Color Effects
  • sACN (E1.31) as Stand Alone Object
  • Read MAC from Microchip EEPROM
  • Optimize Art-Net Code
  • Channel Patch with ability to configure
  • DMX/RDM Driver
  • Serial Configuration
  • Channel Driver dimmer curves
  • Web Configuration
  • Register MAC via ICMP
  • Coding practices (standards for drivers)
  • Code

To be Tested:

  • ArtNet
  • GE Color Effects
  • Channel Driver
  • BAM (bit angle modulation)

Hardware:

Full Project Board Configurations:

  • sACN (E1.31) -> DMX
  • GE Color Effects
  • sACN (E1.31) -> Renard
  • sACN (E1.31) -> Pixels

Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

Re: To do

I just thought of two ethernet items that need to be done:

sACN requires the device to register its MAC via ICMP, not a big deal but should be done.
Also the new MAC eeprom needs to be implement, not sure if this should be in the ethernet driver or one level up.


Reply
Posts: 789
Topic starter
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago

Re: To do

Working on the ethernet driver now, I'll have to look up what ICMP means before I can understand what you just said :).

I'll add this to the current list. I should have a draft of the ethernet up tonight if I get a chance to at least test some functionality. It's very heavily modeled after your code.

Edit:
Do you think there is a use for a template object... to kind of make the code a bit more uniform-ish? or just let everybody go to their own style?


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

Re: To do

chilloutdocdoc wrote:
I'll add this to the current list. I should have a draft of the ethernet up tonight if I get a chance to at least test some functionality. It's very heavily modeled after your code.

I can't take credit for the ethernet driver, I only had a small hand in the asm portion.

Do you think there is a use for a template object... to kind of make the code a bit more uniform-ish? or just let everybody go to their own style?

I think this should cover it: http://www.parallaxsemiconductor.com/an011


Reply
Page 3 / 5
Share: