Dedicated Controlle...
 
Notifications
Clear all

Dedicated Controller System Proposal

11 Posts
5 Users
0 Reactions
9,587 Views
rjchu
Posts: 1191
(@rjchu)
Noble Member
Joined: 17 years ago
DynamoBen wrote:So then what would you rather see created?

Well, since you asked.... 😉

A few of my neighbors are looking at getting in on the madness next year now that word of our display going wireless has spread and they've seen video of tweist's neighborhood on YouTube. So I'm thinking something that would let them, and other DIYC newbs toe dip would be nice. Something like a Ren16SS married with half of a Ren48LSD with the option to add components and a xbee radio on board for wireless control of the whole thing.

-joni-


Reply
Posts: 2630
Topic starter
(@dynamoben)
Famed Member
Joined: 19 years ago
rjchu wrote: Something like a Ren16SS married with half of a Ren48LSD with the option to add components and a xbee radio on board for wireless control of the whole thing.

So 1/2 AC dimmer, 1/2 DC dimmer. By "add components" what do you mean? For wireless would you rather do xbee or WIFI? A WIFI interface is about $30 (W5200 is $20).

Update: Should this device be WIFI directly or DMX, which could be from a WIFI node?


Reply
Posts: 2171
(@mschell)
Noble Member
Joined: 18 years ago

I'd vote for the WIFI or other wireless device that can handle the thruput of DMX as well as Renard. The XBee stuff is great, and works well, but doesn't have the bandwidth for DMX.


Reply
Posts: 789
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago

Interesting requests...

I think the wireless idea is great. WIFI is a great choice. A lot of power possible. Should be plenty for DMX (multiple universes even?). My only concern with wireless is it's lack of reliability when the signals get crowded. Some testing might be needed for this, but what if all of your neighbors are blasting Wifi data and happen to choose the same channel that you do? That being said, I'm not out on the wireless idea... just maybe a provision for switching between wifi/wired?

As for a half and half board. Interesting concept. Great idea that I frankly would've never thought of. I'd be interested in seeing what voltages people would like to use on the DC side (5,12,24 seem to be the common ones). Would definitely have to use different connectors and make it quite obvious as to the difference between the AC and DC version. How many channels on each side? 8 AC and 24 DC? I think too much larger than that and the board will become huge. (Unless we go for smaller packages, not people friendly). My other concern is that if we use transistors like the LSD, you can't run too long of a strip of the 5050 rgb strip, or RGB leds, due to the current limitations... At 400mA you're limited to:
Voltage LED's
5 -------- 20
12 ------- 60
24 ------- 120

I'd like to see some more input from what people would like. I'm thinking the first priority would be user-friendly (documentation, setup, etc) along with reliability, form factor, and following that cost.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

IMO mixing an AC and DC dimmer in the same box would be a bad idea - for sure someone will wire up something to the wrong something and kablooey! It sounds like you're asking for a larger variety of controller sizes - both AC and DC? It would not be a hard thing to create a Ren24LSD, etc.


Reply
Page 2 / 3
Share: