Notifications
Clear all

Power Spliter?

13 Posts
5 Users
0 Reactions
13.3 K Views
Protege94
Posts: 556
Topic starter
(@protege94)
Honorable Member
Joined: 10 years ago
[#48827]

Im looking for a circuit board that has a sort of bus bar built in that will allow me to have one power input but multiple power outputs. I am having a terrible time locating what I want. The attached picture shows what I would like it to be (it is a picture of a different board, but has the connectors I want)

I am wanting to use a 120v power supply that will hav an output of 9v-12v and then feed a total of 5 buttons that will use 9v-12v to light them up. But I am afraid if I solder them directly to the PS wires there will be a power drop causing the lights to be dim.

Untitled

12 Replies
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Are you aware of this board designed by me and sold at Holiday Lighting?
http://www.doityourselfchristmas.com/wiki/index.php?title=Power_Pops_Fanout_-_1_Input_with_4_Outputs

You are correct to worry about voltage drop. At low voltage levels, its impossible to not see voltage drop. 5V is very hard. At higher DC voltages the problem disappears exponentially.
Be sure to read the load testing report that is linked in the wiki above for some real world examples.

How many do you need? If the existing board won't work for you and need something custom, let me know via a PM.


Reply
Protege94
Posts: 556
Topic starter
(@protege94)
Honorable Member
Joined: 10 years ago

Yes that appears like it would work. When I tried to go to your website link I got an error. How much are the completed boards? What is the output voltage range?

ukewarrior wrote:Are you aware of this board designed by me and sold at Holiday Lighting?
http://www.doityourselfchristmas.com/wiki/index.php?title=Power_Pops_Fanout_-_1_Input_with_4_Outputs

You are correct to worry about voltage drop. At low voltage levels, its impossible to not see voltage drop. 5V is very hard. At higher DC voltages the problem disappears exponentially.
Be sure to read the load testing report that is linked in the wiki above for some real world examples.

How many do you need? If the existing board won't work for you and need something custom, let me know via a PM.


Reply
kayjay
Posts: 88
(@kayjay)
Estimable Member
Joined: 16 years ago

Can't get to your web page
"You do not have permission to view this directory or page."


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Hmmm?
Try this:
http://www.doityourselfchristmas.com/wiki/index.php?title=Power_Pops_Fanout_-_1_Input_with_4_Outputs

kayjay wrote:Can't get to your web page
"You do not have permission to view this directory or page."

Reply
Protege94
Posts: 556
Topic starter
(@protege94)
Honorable Member
Joined: 10 years ago

That link works but the http://holiday/lighting link does not work and returns the error.

That does look like a board I could use though, how much is a complete one and what is the input voltage max?


Reply
beeiilll
Posts: 869
(@beeiilll)
Prominent Member
Joined: 19 years ago

Try this link: https://holiday.lighting/ for Holiday Lighting. It is an https link and works for me.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

The holiday lighting link is correct. It's in an unusual format. You may need to type it in correct as what you wrote below is incorrect.
I don't sell the boards. You need to get them from Holiday Lighting. All the specs are in the wiki and documented in the load report. 28V is safe, but it was tested for more as shown in the load report.

Chris sells bare boards, full kits, and assembled units last I checked.
Try this:
http://holiday.lighting

Protege94 wrote:That link works but the http://holiday/lighting link does not work and returns the error.

That does look like a board I could use though, how much is a complete one and what is the input voltage max?


Reply
Protege94
Posts: 556
Topic starter
(@protege94)
Honorable Member
Joined: 10 years ago

Thanks I got it to work and ordered one board.

ukewarrior wrote:The holiday lighting link is correct. It's in an unusual format. You may need to type it in correct as what you wrote below is incorrect.
I don't sell the boards. You need to get them from Holiday Lighting. All the specs are in the wiki and documented in the load report. 28V is safe, but it was tested for more as shown in the load report.

Chris sells bare boards, full kits, and assembled units last I checked.
Try this:
http://holiday.lighting


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Excellent !
I think you will like it.

Protege94 wrote:Thanks I got it to work and ordered one board.

Reply
Page 1 / 2
Share: