Previous years not a problem; below freezing most of the time.
This year I had a lot of plugs corrode to the point of being difficult to separate.
Is there an inexpensive dielectric grease you can use to minimize the corrosion?
I was going to use Jet-Lube Di-electric grease. Is this spray CorrosionX better to use?
I use mass air flow sensor cleaner by Gunk , works great 🙂
Micromutt wrote:I was going to use Jet-Lube Di-electric grease. Is this spray CorrosionX better to use?
the grease is post cleaning and would have prevented the corrosion .
angus40 wrote:the grease is post cleaning and would have prevented the corrosion .
Ok that was what I was going for. :happy: Sounds like having CorrosionX on hand wouldn't be a bad idea either.
This cheaper: http://www.homedepot.com/p/Super-Lube-3-oz-Tube-Silicone-Hi-Dielectric-Vacuum-Grease-91003/202932695 ,
but I will bet that you can find it at an auto parts even less.
This cheaper: http://www.homedepot.com/p/Super-Lube-3-oz-Tube-Silicone-Hi-Dielectric-Vacuum-Grease-91003/202932695 ,
but I will bet that you can find it at an auto parts even less.
I buy about 8oz of the grease for $7 at my local auto parts store.
I use Corrosion X on all of my outdoor rj45 connections, never had one fail. Not sure how it would work compared to grease on vampire or other electrical connections.

