Need ideas for cont...
 
Notifications
Clear all

Need ideas for controller boxes

16 Posts
12 Users
0 Reactions
16.8 K Views
Posts: 116
Topic starter
(@ruthless)
Estimable Member
Joined: 10 years ago
[#50984]

I built some wooden boxes and painted them like Christmas presents, but ended up hating it it added way too much time to setup and they are super heavy and cumbersome.

Ideas??

Sent from my Pixel 3 XL using Tapatalk


15 Replies
Posts: 1168
(@keith-r)
Noble Member
Joined: 19 years ago

Depends on what you are putting in them, I've used GC1000's and 1500's with much success. Some of those boxes I've had since 2009. I also have a couple of ammo crates of different sizes. Some use Bud boxes, HF ammo boxes, HD tool boxes. Pretty much anything that can shed water. There are lots of ideas and builds on this site, the green site, and the FPP and xLights forums.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

CG boxes are clearly the defacto standard for over a decade.
These are so popular that Holiday Coro is making their own specific version of one.
I've used them at least that long and never an issue with one. Very good plastic and they hold paint great if done with Krylon.

Lots of folks are now using ammo boxes and they are cheap and seem to work good too


Reply
Posts: 116
(@jcasterline)
Estimable Member
Joined: 15 years ago

I've been thinking about little presents as controller boxes, also. I'd like to see what yours look like, even though you gave up on them. I was thinking about using clear plastic sheets, glued/sealed on the edges, painted from the inside. I like the idea of a heavy wooden box. wind & weather couldn't budge it.

Currently I have recycled boxes. 2 are circuit breaker boxes, stripped and adapted. I also have used the cable/satellite junction boxes. I have a few enclosures from places like Pac-Tec (they give samples). I reuse and repurpose almost anything.


Reply
Posts: 409
(@dim-bulb)
Reputable Member
Joined: 9 years ago

I got a couple of these, very nice, easy to install cable glands in them, and very water tight, survived winters on the rainy Oregon coast.
https://www.amazon.com/gp/product/B005T94MQU/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1


Reply
Posts: 116
Topic starter
(@ruthless)
Estimable Member
Joined: 10 years ago

Yea went through photos, no clear pictures of my boxes.. but it's essentially a 2x4 frame supported at top and middle with cross boards. Then ply wood on all sides but bottom. The cable boxes mounted inside x4. It was such a pain to hook up all the cords to it. Probably added 3-4 hours to the setup. Didn't bring anything to the display, they couldn't be seen at night, and, well, your know what a bunch of lights looks like during the day.

I'm curious how people take and set up controllers in the yard near the elements/fixtures.

Sent from my Pixel 3 XL using Tapatalk


Reply
ShadowLight8
Posts: 233
(@shadowlight8)
Reputable Member
Joined: 10 years ago
dim bulb wrote:I got a couple of these, very nice, easy to install cable glands in them, and very water tight, survived winters on the rainy Oregon coast.
https://www.amazon.com/gp/product/B005T94MQU/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

I second these boxes. Have used one for several years, both a Halloween and Christmas show without issue.


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

Bud Industry Boxes, Ammo Boxes, CG Series Boxes. They all have one thing in common. They are used all over the place.
To "hide them", you can paint them a color that won't show up in the dark (black/dark grey/etc.), or you can cover them.
A very effective method is to make "Christmas presents" out of coroplast.
I've seen some that had lights all around the inside of the base of the coroplast's case. The CG boxes (in this case) were put in the center. From a visual standpoint you didn't know there was anything inside of the lighted box.

A trick that we use is that a series of boxes are progressively smaller (or bigger) than the last one. As many as 6 boxes have been nested for storage. The controller boxes were put on shelves.

Lots of good ideas in quite a few threads on several of the sites. Check them out.


Reply
Kev7274
Posts: 2037
(@kev7274)
Famed Member
Joined: 13 years ago

I use this https://www.amazon.com/dp/B00T4XL4HM and had had Jason at http://www.jdeation.com/ make me a mounting plate. Turned out great.
I have my Falcon F16V3,power supplies,etc in it.


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

I use BUD boxes but I cover them with garbage cans that look like Christmas presents. My controllers are never subjected to the outside liquid elements.

Sent from my SM-T710 using Tapatalk


Reply
Page 1 / 2
Share: