Don't know how large a 8000 pixels matrix is, but at that level of investment and equipment failure risk, maybe a weather protected TV is an option?
Thanks everyone for your responses. I've always calculated power needs based on full white as a fail safe. I hardly ever use full white as I don't really like the "off-white" color it produces. But I figure if something went haywire and everything turned on, I'd be safe. To answer some of the questions here, I use to only have 8 power supplies on the matrix and 2- 16 channel controllers, but I was constantly having flickering issues due to the length from the controller to the pixels was too long. So I rewired it into 8 sections, and every 2 sections is powered by 3 power supplies and one controller. I have had hardly any issues since. My matrix is 63 rows high and 126 rows wide, making it about 16' x 32' on my roof, so sorry iflights, a TV screen won't work. 7938 pixels times .045A/pixel = 357Amps divided by 30A/supply = 12 power supplies.
So on my new project, if I plan to only run the pixels at 50%, can I essentially put twice as many pixels on a single power supply? In my example above, would it equate to only needing 6 power supplies?
I agree on keeping the power supplies close to the props, I don't mind that, and I have several around the yard. At what point or how many power supplies until you overload the AC circuit breaker? I'm guessing if you plug them all in at the same time the initial power surge will trip it, but if you do one at a time, what is the average number of power supplies on the line are folks seeing?
My rough math would take the wattage and divide by 120, but really I wouldn't do math at all. I would get one of these guys:
This will give you all the real data you need to know.
I would have to agree with jchuchla. We run 5volt pixels in 99% of our show this year. We are still on two breaker's though we are not sure of the draw yet. We also incorporated fuse's on all of our big pixel items to hopefully prevent bad things from happening. About 70% of our props have independent power supply's. We bought a lot off ebay of older Thin client PS's and have been using them. 4 amps per prop is enough for running our show at about 15% bright. Our mega tree is running 2 60 amp 5v PS's just fine. Merry Christmas.
If you plug your PSU's into that thing on amazon I pointed to and set your pixels to the test color you want (e.g. 100% white), that will tell you exactly the current draw you are putting on the breaker. I cannot sing this thing's praises enough.
