Notifications
Clear all

Capacitors

10 Posts
7 Users
0 Reactions
2,598 Views
xGROMx
Posts: 132
Topic starter
(@xgromx)
Estimable Member
Joined: 13 years ago
[#35188]

An idea of using capacitors to resolve in house blinking/dimming.

Setup:
This year was my first year running a light system. I am using 16 strands of C9 bulbs with 1.47A draw each, that's 23.52A total for that system. ~40A total with all the lights, plan on double next year. The lights run though a Contactor box that is timer controlled. 4 dedicated 20A circuits off the panel.

Problem:
When all 16 strings come one at the same time or flash the lights in my house dim to the flashing.

Solution Idea:
Run Capacitors in front of the contacts to help with the inrush/load when all the lights go on.

I am posting on here to see if anyone else has gone this rought or if there is a better solution. I searched expecting to find somthing already, but I don't know if to many people use normal current lights for shows.

Any constructive input welcome.

Thanks


9 Replies
Posts: 2229
(@plasmadrive)
Famed Member
Joined: 15 years ago

If your house ran off of DC voltage that might work.. but not off regular AC house power. You could however put a good sized inductor in series with your power feed to your lights. That would help slow down the rise time of the current inrush. Might help..


Reply
DaveJZ
Posts: 974
(@davejz)
Noble Member
Joined: 16 years ago

Fix it??? That's my show telling me its on without any other indicators... If the lights inside are dimming in know the lights are working as they should... I get worried when I don't notice it...


Reply
MartinMueller2003
Posts: 7612
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

The best solution for you would be to switch to LEDs that would draw 1/5 the current.


Reply
Posts: 112
(@rogelio)
Estimable Member
Joined: 15 years ago

I would have a qualified person check all the connections on the breaker panel and meter. Anytime lights dim when something comes on suggests loose connections to me.


Reply
Page 1 / 2
Share: