wiring pi + 800 pix...
 
Notifications
Clear all

wiring pi + 800 pixels

9 Posts
5 Users
0 Reactions
2,607 Views
Posts: 12
Topic starter
(@twannie)
Active Member
Joined: 5 years ago
[#55591]

I want to make a mobile tree about 2 meter high and 1 meter diameter with a raspberry pi 3b+ + Hanson 28D+ cap running fpp and for testing 800 and later on 1600 5v ws2811 pixels. The cap can handle 800 pixels/port but it has a fuse of 7,5 amp so i asume that i need to power the pixels separate.
For the wiring i have some questions.

Is power injection every 100 pixels enough, or should that be every 50?
Here on the forum i read that i should use the data and -v of the cap, but i should i also connect the -v from the dc converter to the pi cap?
Also i read about a power distribution board, is tha the same as a fuse box like the picture i ad?
I have made a scetch how i want to do the wiring, is that the correct way?

Thanks for the help.

wiring
zekeringkast

8 Replies
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

For 5V pixels, no single pixel should be more than 50 pixels from a power injection point. IMO, you dont need the fuse between batteries. Your fuse boards look fine.


Reply
TomL8345
Posts: 1356
(@toml8345)
Noble Member
Joined: 15 years ago
MartinMueller2003 wrote:For 5V pixels, no single pixel should be more than 50 pixels from a power injection point.

Martin, I certainly agree with your statement, but it is important for the OP to remember that power flows both ways in a string of pixels. If for example, you feed power to pixel 1, then your Power Injection points would be at pixels 100, 200, 300, and so on. This keeps every pixel within 50 of the PI point.


Reply
Posts: 12
Topic starter
(@twannie)
Active Member
Joined: 5 years ago

Thank you both for youyr feedback! Will start on the wiring 🙂


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

I'm curious as to the reason of running the batteries in series creating the 24vdc feed. Not against it, just wondering why.


Reply
Page 1 / 2
Share: