....besides price, length and chip set. Which is the better strip to use? I will use the full length for each leg of a pixel tree. Not sure but might do 16 strips and use a e682 controller to run it.
http://www.aliexpress.com/store/product/4m-waterproof-LED-digital-strip-by-tube-DC12V-input-without-controller-10pcs-TM1809IC-m-30pcs-5050/701799_425556741.html
http://www.holidaycoro.com/Smart-Pixel-LED-RGB-Strip-30-LEDs-m-50-Pixels-m-p/700-ps.htm
Can I run 16 strips off of ONE e682??
RobertB wrote:....besides price, length and chip set. Which is the better strip to use? I will use the full length for each leg of a pixel tree. Not sure but might do 16 strips and use a e682 controller to run it.
http://www.aliexpress.com/store/product/4m-waterproof-LED-digital-strip-by-tube-DC12V-input-without-controller-10pcs-TM1809IC-m-30pcs-5050/701799_425556741.htmlhttp://www.holidaycoro.com/Smart-Pixel-LED-RGB-Strip-30-LEDs-m-50-Pixels-m-p/700-ps.htm
Can I run 16 strips off of ONE e682??
The first strip (TM1809 IC) has the capability of individual control of all 30 leds/meter (the TM1809 chip controls 9 channels)
The second and third appear to be similar with the WS2811 control chip able to control only 3 channels, so both of these strips are only controllable in groups of 3 leds (30 leds/meter but only 10 individual pixel control/meter)
It's personal choice but I feel that display of graphics or text suffers when using the WS2811 10 IC/meter for matrix or pixel trees although I am ordering a bunch of them for arches and other props which I think will look good when grouped by 3.
Sorry I can't comment on the e682 as I use Pixelnet equipment.
Good luck,
Ron
E682 is a top notch controller. Very versatile. I agree about the strips. For bordering the house outline they would fine but for a megatree I'd find individual controlled pixels.
Sent from my SCH-I545 using Tapatalk
