Using bullet node p...
 
Notifications
Clear all

Using bullet node pixels for icicle lights

51 Posts
15 Users
0 Reactions
20.7 K Views
Posts: 311
(@neilric99)
Reputable Member
Joined: 17 years ago

yes waterproof connectors and power injection T's would be needed, but thats the easy part.


Reply
Posts: 240
(@lowepg)
Reputable Member
Joined: 13 years ago
neilric99 wrote:I spoke with Ray last week and he understands what he needs to do to create the data path from the bottom of a drop to the top of the next drop. He is going to work on creating the 4 wire pixel using 12V WS2811's to do this. hopefully Ray will be able to build out whatever you want as far as spacing and drops are concerned. Just make sure that you get them done in the first half of the year when he has more time to organize custom strings.

That would certainly work and look super-clean, but i think a simpler way would be the way seasonal entertainment did theirs. They simply added enough extra lead length at the end of a dro so they could "fold it back", follow the drop back to the top, then on to the next drop.

Here's a close-up- and from any appreciable distance, I think it would look fine!

Screen Shot 2015 02 09 at 7.39.40 PM

So i think this would work, I just want longer drops/more pixels in this same configuration.


Reply
Posts: 115
(@loveroflife96)
Estimable Member
Joined: 16 years ago
Lowepg wrote:That would certainly work and look super-clean, but i think a simpler way would be the way seasonal entertainment did theirs. They simply added enough extra lead length at the end of a dro so they could "fold it back", follow the drop back to the top, then on to the next drop.

Here's a close-up- and from any appreciable distance, I think it would look fine!
>

< So i think this would work, I just want longer drops/more pixels in this same configuration.

This is exactly what I was planning on doing if no one had made headway with Ray as a ready made product. You can request custom lengths so I was going to create a specified distance between nodes so I could run my pixels like the above picture. I'd prefer (and would pay for) them to already be attached in the data through line rather than having to zip tie or come up with some solution for that part. Excited to see what Ray comes up with!

Duane


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

Ray posted both dumb RGB pixels and some smart drop strings in his facebook feed for those with facebook. He would work on the individual pixel control ones after the CNY closure this month.

Wanting to have the smallest drop of 8 myself so I can make this more like a matrix and about 9" between drops. The idea of just bringing up an extra long wire from the bottom and zipping it up would work great. Might even stiffen up the drops a bit especially if you had Ray make it out of heavier wire than normal.

Alan


Reply
Posts: 240
(@lowepg)
Reputable Member
Joined: 13 years ago
loveroflife96 wrote:This is exactly what I was planning on doing if no one had made headway with Ray as a ready made product. You can request custom lengths so I was going to create a specified distance between nodes so I could run my pixels like the above picture. I'd prefer (and would pay for) them to already be attached in the data through line rather than having to zip tie or come up with some solution for that part. Excited to see what Ray comes up with!

Duane

Just got a quote back from Ray for an 86-node smart pixel icicle string:
$29/each

The layout:
6" between drops
4" between each bulb on the drop
drops of 6, 5 and 4 nodes
96" total length of string

Im pretty happy with that price given the number of nodes. It's more than double the nodes compared to Seasonal Entertainment at roughlt the same price (after shipping).


Reply
Page 9 / 11
Share: