Using bullet node p...
 
Notifications
Clear all

Using bullet node pixels for icicle lights

51 Posts
15 Users
0 Reactions
20.6 K Views
Posts: 838
(@strother85)
Prominent Member
Joined: 15 years ago

I never thought of doing it that way, j thought I was going to have to do a lot of cutting/soldering. I'm assuming you are using 12v bullets? How often did you inject power? I'm thinking you probably left the 6804 centrally located and ran extensions to 100 pixels off each of the 4 outputs?

Sent from my SAMSUNG-SM-G900A using Tapatalk 2


Reply
dsmjuggalo
Posts: 663
(@dsmjuggalo)
Prominent Member
Joined: 15 years ago

Well I actually have 3 6804's on my roof. One powering the upper icicles which are 2 strings of 130count 12v bullets, a window frame and bush. The 2nd one powers the middle icicles which is 2 strings of 140 count with no power injection, a door and window frame. The 3rd power 2 strands of 130 count no power injection here either. Over kill on the 6804s but I didn't want wires running everywhere. My whites were pinkish but I lived with it this year. Next year I'll be injecting for sure.

Sent from my iPhone using Tapatalk


Reply
Posts: 853
Topic starter
(@roterhead)
Prominent Member
Joined: 15 years ago

On the right track but just too short. I'm thinking of 6 and 8 light lengths, with maybe some 4's...

But this is the idea!

neilric99 wrote:check out the rainbow icicles from seasonal entertainment http://www.seasonalentertainmentllc.com/store/en/rainbow-pixels-ws2801/187-rainbow-pixicles.html

I am going with nearly 80ft length of this for next year. 12 x 6.5ft strings.


Reply
Posts: 853
Topic starter
(@roterhead)
Prominent Member
Joined: 15 years ago

Yes, that is the type of look I am heading for. Thanks for the PIC, always helps to visualize!

dsmjuggalo wrote:I did. I loved how they turned out

Reply
Posts: 311
(@neilric99)
Reputable Member
Joined: 17 years ago

the other option I am looking at is to get some custom made by Ray Wu and have them a layout of 4- 6 - 8 pixels (may be slightly different drops when I see them though as a 8 drop will be around 24" when in zigzag unstraightened format , 32" drop length) with 4" between nodes and 6" spacing between the drops.

Roterhead wrote:On the right track but just too short. I'm thinking of 6 and 8 light lengths, with maybe some 4's...

But this is the idea!


Reply
Page 2 / 11
Share: