beeiilll wrote:If you are going to go to all the trouble to encapsulate and waterproof your own strings I would seriously consider using something like the APA106 pixels. Less components to worry about as the IC chip components are already integrated into the LED housing and less connections to worry about since you now don't need the 8 pin chip on the board either!Something like this:
http://www.ebay.com/itm/100PCS-APA106-RGB-Pixels-12MM-Waterproof-Addressable-LED-String-Light-Logo-DC-5V-/271673807719but of course without the epoxy applied.
I can get a price for some strings from a couple places if you would like? Would you like 50 node strings or 100 node ones? Also flat 3 wire cable in black or colors?
Let me know and I will see what they can do. I have already gotten some string done without waterproofing from one place so that I could inspect the boards and connections just to let you know.
Of course these are 5 Volt just so you are aware and not 12 Volt.
Interesting. I'll order the waterproof ones, but where did you get the raw boards from?
I prefer the 3 wire cable in black. (I don't know why anybody would prefer colors, or why they even make those...). Just need a short string for testing.
I have a couple of different manufacturers that I am working with on doing some things. I should have pricing on strings without the waterproofing tomorrow to see what they can do. I can buy the boards from them as well.
I did do the request for black wire and no connectors on 50 node strings also.
Removed!
Info updated later.
And the answer is?
beeiilll wrote:Okay so I got a price for strings from one manufacturer so far.
For a 50 node, APA106 8mm pixel, 3 wire flat black cable with 100 mm spacing between nodes and 20 cm input and output leads with no connectors on them,
I heard from Ray Wu yesterday.
Dear Tom,
have you received the new pixels,is it better?
thanks and best regards
Ray
Hi Ray,
Yes I did receive the pixels.
However, they were the wrong spacing since all of mine are 10cm center-to-center. Also, the glue you used on them was quite messy with lots of big dried drips. The glue also appears to be silicone which does not hold up very well since it just peals off. For these reasons I have not even applied power to these pixels.
The pixels I already had stop failing after the 9th pixel failed and have been working for a few weeks. I had glued 3 of my 7 strings using Loctite 406, which works very well but takes a long time to apply.
We have had a lot of rain but mostly temperatures have been near 0C and above. It will start getting much colder this week.
My opinion is that pixels fail for different reasons, such as manufacturing quality, water intrusion, or temperature change.
I do not think I will order any more of these pixels unless you can come up with a more reliable design.
-Tom
Dear Tom,
Thanks for your letting me know your feedback.will give you some discount next time
i will making a new design, i will send you some free samples for testing when finished before our Chinese new year holiday.
thanks and best regards
Ray
That is interesting Tom. Would love to her what the "new" ones look like and how they are put together.
I do think that Ray is sincere in wanting to get a design that works for us, so it will be interesting to see what he comes up with now.
Do you have pictures of the latest ones that he sent you by the way?
I was going to ask why the MoonDew name but I went to look at your site and listened to the mp3's about MoonDew, so now I know! Sounds a lot like one of the Firesign Theater performers on there by the way?
Thanks for the heads up, was just about to order 600 of the C9's from Ray. time to sit and wait it out.
The latest string Ray sent me was the same as the V2 pixels with silicon applied to them.
I believe he will make another attempt to make the pixels more reliable. Hopefully he will succeed. I don't think he would send free replacements, samples and discounts if he didn't care about getting everyone's business, and I think many people have made it very clear to him that what he is shipping now is not good enough.
Moondew is from the Warner Reprise Radio Show LP from the 1970s.
I want to pick up a couple of strings of the new ones and see how they look and work as well as make up some test pieces to put out in the weather for some time and see how they weather.
Yea, I am from the 70's myself so a lot of the ole time radio theater type shows were fun to listen too.
"Don't Step on That Dwarf! Hand me the pliers!" - Firesign Theatre
beeiilll wrote:That is interesting Tom. Would love to her what the "new" ones look like and how they are put together.
I do think that Ray is sincere in wanting to get a design that works for us, so it will be interesting to see what he comes up with now.Do you have pictures of the latest ones that he sent you by the way?
I was going to ask why the MoonDew name but I went to look at your site and listened to the mp3's about MoonDew, so now I know! Sounds a lot like one of the Firesign Theater performers on there by the way?
