Emuney18 wrote:What spacing does everyone like for the C9 bulbs? 4,6,8 or 12"
I use 4"
Louie
Sent from my SM-G928V using Tapatalk
nutz4lights wrote:I use Ray Wu's technicolor bulbs. Videos are located at the link below. I am one of those old fashioned nuts that really likes the classical look of a true c9 bulb on the roof. I had the technicolor v1 bulbs that failed. Ray replaced those for me with the technicolor v2 bulbs that failed. I was one of the folks that helped Ray troubleshoot their manufacturing failure. He moved away from injection moulding the base to an epoxy filled setup. Because there wasn't another bulb comparable, i had Ray replace the v2 with the v3 at no cost to me. They have performed perfectly for two years now. 400 bulbs not a single failure.I tested the pixabulb at some point and although it was nice, it is simply not a c9. I suppose if the epoxy filled technicolor bulbs didn't work, i would have considered using the pixabulb, but they DID work and i didn't have to compromise.
Let me know of any questions.
Louie
Sent from my SM-G928V using Tapatalk
Your video information states you have 17,500 WS2811 nodes - if only 400 are Ray Wu's Technicolor, what type are the rest? What has the failure rate been?
I have a mix of bullet style ws2811 pixels and square ws2811 pixels, all from Ray. From memory, there are 2400 + 1600 + 3900 = 7900 square pixels in our megatree, tall palm trees, and window matrix units, respectively. There's 1800 + 2000 + 2000 + 1000 + 1600 =8400 bullet style pixels in our oak tree, twig trees, bushes/short palm trees, wreaths/ornaments, and mini trees, respectively. I'm obviously forgetting something because that only adds up to 16700...
Anyway, some of these lights have gone thru four full seasons without failure. I have personally found that the bullet nodes fail less frequently that the square nodes. I think it has to do with the distance moisture would have to penetrate epoxy fill to get to the circuit board and LED. on the square pixels, that distance is much shorter, and i see higher failure rates with those pixels. Not gonna make me change, though, as those elements sort of require them...
Louie
Sent from my SM-G928V using Tapatalk
Just remembered, we have another 700 bullet pixels in three large wreaths we added last year and another 150 bullet style pixels in our megatree star, pushing the bullet pixel count to 9250 and the total to 17550.
Louie
Sent from my SM-G928V using Tapatalk
Emuney18 wrote:What spacing does everyone like for the C9 bulbs? 4,6,8 or 12"Sent from my iPhone using Tapatalk
12" on the roof and 10" along the ground.
Sent from my iPhone using Tapatalk Pro
