Ron's controllers
 
Notifications
Clear all

Ron's controllers

10 Posts
8 Users
0 Reactions
2,825 Views
Posts: 86
Topic starter
(@onceler)
Estimable Member
Joined: 9 years ago
[#50431]

In my quest to reevaluate my small but growing show I started looking at some controllers that I don't getting a lot of mention specifically Ron's controllers.

Those using Ron's controllers are they"okay"?

Is there some reason the Falcons are seemingly used more often?


9 Replies
DrNeutron
Posts: 2017
(@drneutron)
Noble Member
Joined: 14 years ago

I have been using one of Ron's 16 universe controllers for 3 years now and it has been a rock.
Ron's controllers aren't given much advertising because they aren't as flashy as a Falcon and require a bit of technical knowledge to setup but once setup just work.
His controllers are multicast and there is no webpage for configuration, you just set a few jumpers to specify start address and then the rest is setup in xlights.
He has since added daisy chaining to his 4 port and 16 universe controllers which is a great feature to cut down on cabling.
Ron's controllers are based off an FCPGA and handle pixel data very efficiently, his designs are a stripped down version of most pixel controllers with no fusing etc.
You just set it and forget it.
He even has a four output controller (682 pixels per port) for only about $27.
:thup:


Reply
Posts: 299
(@dcamron)
Reputable Member
Joined: 10 years ago

I've been using Ron's controllers for at least 4 years. They're solid, incredibly fast and I think they're easier to setup. I currently have 5 of them along with a Falcon F16V2. Ron's 16 Universe controllers can be reconfigured easily to change output types and use differential receivers. You can even do POE with it. His 4 output controller is a cheap, simple plug and play controller. He also has other controllers that I haven't tried, including a matrix controller. On the down side, the 16 universe controller can be a challenge to mount because it has several stacked PCB's and you can add daughter cards that also need to be secured.

I'm not as pleased with the F16V2 and will probably let it go this year. Thankfully, they hold their value well so I should get most of my money back.


Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago

I agree with the above.

Ron's designs are Open, efficient, innovative and get the job done.

Definitely deserves more acclaim than they have.

https://ronsholidaylights.com/

-Craig


Reply
Posts: 55
(@andsolo21)
Trusted Member
Joined: 9 years ago

I’ve been talking with Ron, about his controllers as I’m looking to puchase some myself this year for my new show, once the wife sign off on it, must say I’m highly impressed with the reviews and the make up of the boards, plus you can go hands on unlike the falcon controllers and build it yourself. Where else can you get a 16 universe controller for less than $30’s


Reply
Page 1 / 2
Share: