Pixels gone dark
 
Notifications
Clear all

Pixels gone dark

12 Posts
5 Users
0 Reactions
3,071 Views
Posts: 92
Topic starter
(@curtinti)
Estimable Member
Joined: 7 years ago
[#53710]

Everything in my display has been issue free up until today. I have a row of 4 arches daisy chained off a port of a falcon receiver. First arch is fine but the next 3 are dark. Noticed it mid show so i did a quick xconnect extension swap but still not working. Im running 12v regulated pixels.

Do you think all of the pixels after the first arch are toast? If it was a bad pixel i would expect to see so strange pixel behavior not complete darkness.

I find it odd that the issue is right in between arches. What basic troubleshooting besides swapping the extension so i attempt first before trying to replace strands?

Tim

Sent from my iPhone using Tapatalk


11 Replies
wilmar
Posts: 2115
(@wilmar)
Noble Member
Joined: 8 years ago

If you have a spare strand plug it in to see

Sent from my iPhone using Tapatalk


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

last working pixel may be bad. power/data to first not working pixe; are broken. first not working pixel is broken and clamping the data line/ etc. not all issues result in random flashes.


Reply
Posts: 92
Topic starter
(@curtinti)
Estimable Member
Joined: 7 years ago
wilmar wrote:If you have a spare strand plug it in to see

Sent from my iPhone using Tapatalk

Totally newbie question ... can i pop a test strand on while everything is powered? Or do i need to power everything down.

Sent from my iPhone using Tapatalk


Reply
wilmar
Posts: 2115
(@wilmar)
Noble Member
Joined: 8 years ago

I have

Sent from my iPhone using Tapatalk


Reply
Page 1 / 3
Share: