PixelBulb Mounting ...
 
Notifications
Clear all

PixelBulb Mounting Options

34 Posts
11 Users
0 Reactions
22.6 K Views
Posts: 133
Topic starter
(@byhova)
Estimable Member
Joined: 9 years ago
[#50978]

I am curious how the people here mount their PixelBulbs (diyledexpress) to their house? I will have them around my Windows, Roofline with gutters, and the roofline without gutters. I seen that Boscoyo mounting strips that the bulbs can pop through just not sure how I would mount them to the gutters or the roofline. So I just curious how you guys here that use PixelBulbs mount them to their house. I thought about mounting them to PVC pipes but then I not sure how to mount the PVC to the gutters and/or window frames & non-guttered roof lines. Thank you anyone for your input. I am just waiting my order to arrive, excited to get started for my first year with a show


33 Replies
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

We have the following.

Pixabulbs are mounted in the Boscoyo strips push through holes.
Strips are attached to 1/2" conduit (zip tied).
There are 1/2" conduit clamps mounted to the house every x-number of feet.
The conduit snaps into the clamps.

What makes this great is that the clamps stay up year round. The conduit pops in and out fairly easy.
Clear clamps are good to work with, and are not noticed when lights aren't present. I don't have any clamps that have been painted in place, but others have.


Reply
Posts: 133
Topic starter
(@byhova)
Estimable Member
Joined: 9 years ago
algerdes wrote:We have the following.

Pixabulbs are mounted in the Boscoyo strips push through holes.
Strips are attached to 1/2" conduit (zip tied).
There are 1/2" conduit clamps mounted to the house every x-number of feet.
The conduit snaps into the clamps.

What makes this great is that the clamps stay up year round. The conduit pops in and out fairly easy.
Clear clamps are good to work with, and are not noticed when lights aren't present. I don't have any clamps that have been painted in place, but others have.

How do you mount the clamps to the gutters? Also do you just screw them into the wood frame of the window and the fascia board of the roof line? Also where do you get those clamps a box hardware store?


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

The clamps up on the dormers, and anywhere else there is a hard surface, are screwed in (with appropriate sealing).

In those areas where there are gutters, instead of the clamp we have a gutter clip attached to the conduit at appropriate distances. They clip directly onto the gutters when in use.


Reply
Posts: 1120
(@4586shaggy)
Noble Member
Joined: 14 years ago

Pixabulbs in Boscoyo strips, zip tied to 1/2" PVC, mounted to gutters and shingles with 3d printed clips.

Sent from my Pixel 2 XL using Tapatalk


Reply
Page 1 / 7
Share: