Pixel mega-tree: No...
 
Notifications
Clear all

Pixel mega-tree: Nodes or strip?

13 Posts
6 Users
0 Reactions
5,732 Views
jlowe
Posts: 952
Topic starter
(@jlowe)
Noble Member
Joined: 16 years ago
[#23617]

I'm just looking for some feedback from folks. What do you use for your pixel mega-tree? The actual pixel nodes on a string (which then get mounted on a structure and spaced accordingly), or pixel strips?

What are the advantages/disadvantages of each? I'm really torn on which way to go, and want some feedback.

Thanks!


12 Replies
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago

My megatree was 24 strings of 50 nodes each. I much prefer this look as it's more "traditional".


Reply
wbottomley
Posts: 550
(@wbottomley)
Prominent Member
Joined: 18 years ago

That's what I'm looking for. Thanks Todd. Do you plan to carry 50ct nodes 2811 in 12VDC?


Reply
jlowe
Posts: 952
Topic starter
(@jlowe)
Noble Member
Joined: 16 years ago

Are the strip pixels more rectangular in size? I know the pixel nodes are clear "points" and so it's fairly easy to make visual elements that have correct aspect ratio.

What I mean is, if a image was used, it would keep appropriate proportion rather than appearing stretched. Does this hold true for strips as well?


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Strips tend to look like a neon tube as the pixels are much closer together. But they cost alot more per meter because of this. Most people use strings because of cost. Strips will still give that stretched look if your using a tree shape. The software Matrex (sp) can work around this I believe. But it's not cheap and isn't the best to sequence to music. The best way to use a image and keep it proportional is to have a square or rectangular field.
Brian


Reply
jlowe
Posts: 952
Topic starter
(@jlowe)
Noble Member
Joined: 16 years ago

So, if a strip is 30 LEDs a meter, that's 30 pixels per meter? Does that mean 60 LEDs per meter strips have 60 rgb pixels every meter?? Wow.


Reply
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago
jlowe wrote:So, if a strip is 30 LEDs a meter, that's 30 pixels per meter? Does that mean 60 LEDs per meter strips have 60 rgb pixels every meter?? Wow.

That depends a lot on the IC. Some ICs control 3 RGB LEDs and some control 1 RGB LED. Each IC is a pixel, and each pixel can control 1 or 3 LEDs (Typically)


Reply
jlowe
Posts: 952
Topic starter
(@jlowe)
Noble Member
Joined: 16 years ago
tjetzer wrote:That depends a lot on the IC. Some ICs control 3 RGB LEDs and some control 1 RGB LED. Each IC is a pixel, and each pixel can control 1 or 3 LEDs (Typically)

Ok, thanks. So, what about the ones on your site? I can't figure out how to tell.


Reply
Posts: 67
(@bhays)
Trusted Member
Joined: 18 years ago

What is the spacing on that tree? They look very close together. Most trees with strings that I've seen didn't look that good.


Reply
Posts: 347
(@dougd)
Reputable Member
Joined: 19 years ago

Are you using any strapping or is that just the pixel string without any support?


Reply
Page 1 / 2
Share: