superdave wrote:You could probably go with a Falcon F4v3 to get 4 outputs, and use your FPP Pi to be the master control.https://www.pixelcontroller.com/store/index.php?id_product=51&controller=product
You would be able to have the 4 outputs on the new controller and continue to use the 2 ports on your PiCap. Obviously, you may want to continue to grow, and may want to get a bigger controller so you have room to grow. Something like the F16v3
https://www.pixelcontroller.com/store/index.php?id_product=48&controller=product
Hopefully that gives you some stuff to dig into!
I have a silly question about this. Does the Falcon F4v3 have FPP built in or will I always need a Pi+PiCap with FPP running to run my show without being connected to a computer?
The two primary methods you could use with the Falcon F4v3 would be using FPP on a Pi (PiCap would be optional... only if you want the Pixel outputs on it)
OR...
You could use xScheduler on a PC instead. Falcon F4v3 doesn't have FPP built-in, yet... although I think there was talk of doing that for at least the larger controllers. I don't think they have the built-in functionality yet. It might need a "v4" before the'll have that?
Just to muddy that waters a little, what about an E6804? Will the Piicap run any e1.31 controller or just the Falcon controllers?
The FPP will output e1.31 to any controller that accepts e1.31 input.
You could just use a the picap to run the 4 trees.
I ended up just using the Falcon PiCap. FPP 2.X made setting up 4 strands on 2 outputs super easy. I will definitely be getting a controller for a mega tree in the near future though 🙂
