mrGrumpy wrote:Did you try a couple pixels prior to the problem area?
I tried cutting out the last pixel that would light. I would not think there is an issue before that.
The one before that may not be sending an incomplete packet, then the next pixel fixes before sending on down the line. Try the one before the problem.
mrGrumpy wrote:The one before that may not be sending an incomplete packet, then the next pixel fixes before sending on down the line. Try the one before the problem.
This is the type of issue my description was trying to solve. If the pixels part way through the string are showing the color that is supposed to be at the end of the string then one or more of the pixels are throwing away some of the data.
String "A" the first 7 pixels would light, but nothing after that. I have removed pixel 8 and rebuilt the string - no lights beyond #7. I have removed #7 and reattached the string, no lights beyond pixel 6. I have connected the string to the controller at #9 and still no lights.
Do I give up on this string and move on, or should I keep cutting 1 pixel off at a time and keep retrying?
String "B" the last 7 pixels will not light. I have not started to trouble shoot that yet. My gut is telling me to just cut off the bad section and move on with life, but I am open to suggestions.
If starting at #9 does not work then you have more going wrong than a pixel or two being dead. It might be time to stop wasting time and dump the string. You might sort through it in th efuture to see if you can find any surviving pixels

