New - Pixelnet Pixe...
 
Notifications
Clear all

New - Pixelnet Pixel Controller - 16 strings

50 Posts
24 Users
0 Reactions
22 K Views
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago
kselswick wrote:Any idea when this might become available. I have been debating on which controller to use, I don't like the idea of multiple ssc's and single selection pixels. I was following this on the other forum and must say I was a little shocked at how the discussion was cut off and locked out.

Thank you for your interest. I just got word back that boards are being shipped out on the 16th. So if all goes well they will be out soon. I am putting the finishing touches on the firmware and will be looking for 8 people to do beta testing. I have produced a Mouser BOM that came in at $107 for all parts minus the board and processor which looks to be about $30.00 ($13.00 board + $6.00 mounting + $11.00 processor) for the first boards. So a complete board is about $15.00 more then we had hoped for. If we get enough interest the price will go down on next batch.


Reply
Posts: 138
(@tmcteer)
Estimable Member
Joined: 15 years ago

I'd be interested in beta testing. I've have a variety of strings 2811, 2801, 1804 ss GECEs and have Todd's new WS2811 C9s on order. Have the ability to SMD solder as well if the boards don't come with the proc already soldered.

Tom


Reply
Posts: 138
(@tmcteer)
Estimable Member
Joined: 15 years ago

Forgot to mention... a couple of Etherdongles with pixelnet if needed.


Reply
Posts: 1076
 Zeph
(@zeph)
Noble Member
Joined: 15 years ago

Let me check that I understand this.

This would be a board which accepts control from the computer via RS-485 over cat5/RJ45 cabling. It can simultaneously receive from two of the four pairs in such a cable, each running at 1 Mbps asynchronous, for a total of 200,000 bytes/second. Each pair controls up to 4096 eight-bit channels and is called a pixelnet universe (versus a DMX universe of 512 channels), so this board can control up to 8192 channels overall. It translates those channels in a flexible configurable way to up to 16 pixel strings in a variety of protocols. Right?

What options are there for sending the pixelnet data from the computer to the board? Do you need to get in on a coop at another website to obtain them?


Reply
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago

Zeph,

You are correct. There are two devices that can be used to send Pixelnet from a computer to devices.

Method#1
A USB dongle loaded with Pixelnet firmware that can send out a single Pixelnet universe.

Method#2
An EtherDongle that receives E131 over a network and translates it to 4 Pixelnet Universes for a total of 16384 channels.

Both device would have to be purchased on DLA during the regular coops or from the store.

I prefer to use the Conductor which is a standalone Pixelnet player. Removing the need of a computer.


Reply
Page 5 / 10
Share: