This board uses the newer style wiznet from what is shown in the image, the older style (original on the E680's and E681's) would be too large to fit, the board would have to be larger
kidcole wrote:Since many of us have extra Wiznet modules from upgrading the 681s to 1Gb models...
Denny, or anyone for that matter, if you have any extra Wiz812 modules you want to sell off, please PM me. I anticipate adding some more E680's.
Max-Paul wrote:I always thought that a fuse was for two purposes. 1) to greatly reduce the chance that something is going to get super hot and start a fire. 2) to keep a fault from possibly taking out the electronics. I realize that there are those who dont want to be bothered by something like a fuse blowing several times and having to replace the fuse. Learn how to do a thorough job of trouble shooting and clearing faults. There are those who will give up safety to save a few bucks.I for one am glade to see that Jim is building these with fuses. Dont let the naysayers side track you. I like your board design. Dont know what to say to those who want to save a couple bucks. But those who think fuses are just one more thing to fail. Like someone else said, just hard wire around the fuse holder.
sorry im not trying to start anything but your response seems to be geared more to the AC voltage side than anything. all the voltage coming into this stuff is low voltage DC. So if something shorts sure it will fry a component or a pixel string but by any means i wont expect a fire. I guess in an extreme case it could get hot enough to catch fire but the risk of that is so high.
I mean this all started b/c i made an idea suggestion, only reason is b/c he has 2 diff boards, one with fuses and one without. so i threw an idea out there. He doesnt have to use the idea. I have lots of ideas that do not suite most people. Heck ill say i actually hated the 680 series at first b/c i dont like pixel controllers that have so many outputs in 1 spot an the GUI. i like distributed pixel controllers but noone has made any up to date ones til late in last season and now this one. Now i run 2 and im liking them and cant wait for this one to be released and try it.
sorry for sidetrack, im looking forward to getting a few of these.
Fathead,
Not trying to confront, but I have to say I am 54 and in one form or another have been a electronics / electrician tech. I have seen low voltage but high current do some damage. Look at the current that is required by some of these strings that run 5 volts. I have messed up a few times over my life and I am all for protection from fuses. So, it is nothing personal, but I will voice strongly against removing a protective device. Just one opinion versus another one. I suppose mine is just more passionate. Hopefully, No harm, No foul.
Right on. The damage that can be done by 5V @ 50A can be a mess to fix. At least power supplies should fold back but not always. If your feeding from batteries then you can get some serious damage.
I used to ware a ring but I was always taking if off when working around high power but low voltage supplies. I've heard of guys almost amputating a finger when they shorted their ring accross a 100A 5V supply. Do that accross a car battery and it by by finger.
