Need Help (E682 Tes...
 
Notifications
Clear all

Need Help (E682 Test Colors)

8 Posts
2 Users
0 Reactions
1,888 Views
Ronnie
Posts: 206
Topic starter
(@ronnie)
Reputable Member
Joined: 11 years ago
[#43588]

I finally have the outline up on my house and can turn on lights!! Big accomplishment. I ran a test from e682 page for blue but for some reason 4-1 and 4-2 are green. I've attached screenshots of my setup. The ws2811's have brg as order on the bags they came in.

e682pic

7 Replies
Ronnie
Posts: 206
Topic starter
(@ronnie)
Reputable Member
Joined: 11 years ago

Well, for some reason I had to change a couple of the output color order boxes to run my xlights correctly. I did a test solid blue for everything sequence in xlights, then while that was running in fpp, I changed the e682 settings one by one until all lines were solid blue. Now the test pattern on the e682 page doesn't run correctly on all lines, but at least xlights is. Could it have been a couple of the strip bags were labeled wrong? I don't get it.


Reply
JCook
Posts: 1003
(@jcook)
Noble Member
Joined: 13 years ago

set them all to RGB and see what colors they are then. Don't rely on the bag.


Reply
Ronnie
Posts: 206
Topic starter
(@ronnie)
Reputable Member
Joined: 11 years ago
JCook wrote:set them all to RGB and see what colors they are then. Don't rely on the bag.

I had to set them to 3 different settings... take a look at the screenshot

e3

Reply
JCook
Posts: 1003
(@jcook)
Noble Member
Joined: 13 years ago

that's not uncommon considering different manufacturers. All of my pixel nodes are RGB. My smart strips are all BRG


Reply
Ronnie
Posts: 206
Topic starter
(@ronnie)
Reputable Member
Joined: 11 years ago
JCook wrote:that's not uncommon considering different manufacturers. All of my pixel nodes are RGB. My smart strips are all BRG

I bought 12 reels in one order from holidaycoro. They all say BRG. Oh well, keeps my brain exercised, lol.


Reply
Ronnie
Posts: 206
Topic starter
(@ronnie)
Reputable Member
Joined: 11 years ago

On a side note... Is the order determined by the first chip and then passed on to rest of string? I ask because if I have a couple lines that are 2 plus strings hooked together. Now, I either got lucky and the ones I used were the same color order, or.....?


Reply
Ronnie
Posts: 206
Topic starter
(@ronnie)
Reputable Member
Joined: 11 years ago

Another question... Does the pixel length entered have to be exactly as what is physically on the strip? I ask because I had a green on the green test. Then I changed a couple numbers and those outputs are now red, not green. But the rest stayed green. I'm trying to understand how channel count changes behavior, especially as it relates to how xlights and 3682 play together.


Reply
Share: