multicast or unicas...
 
Notifications
Clear all

multicast or unicast?

12 Posts
5 Users
0 Reactions
2,939 Views
Aurbo99
Posts: 2803
Topic starter
(@aurbo99)
Famed Member
Joined: 19 years ago
[#51846]

Running into issues while upgrading.

4 - e682
1 - e6804 <replaces an old e682

currently running multicast on wired network

the 6804 is not outputting in Vixen but will work in test mode.

6804 is configured for Universe 8 channel 94 thru Universe 9 channel 426

should I change to unicast?

if so, how do I do this correctly


11 Replies
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

I see no reason it would not work multicast. Sounds like a config error either in Vixen or on the controller. Can you post screen shots on their configurations?

Sent from my ASUS_A009 using Tapatalk


Reply
Aurbo99
Posts: 2803
Topic starter
(@aurbo99)
Famed Member
Joined: 19 years ago
config2
config3
config5

Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

Hard to tell (on my phone) but universe 8 in Vixen does not look like it is set to 510 (or 512) but you said that is crosses to universe 9.

Also it is still on firmware 4.x but the newer pixels require 5.x because of new timing values.

Sent from my ASUS_A009 using Tapatalk


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

THe output desetination in Vixen looks unusual. How did you get an option in the list called Multicast e68x? That should look something like "Multicast Ethernet" or "Multicast Local Area Connection" It should be the name of the network controller on your PC. Did you change the name of your network interface to "e68x"?


Reply
Page 1 / 3
Share: