Mixing 2811 Pixel T...
 
Notifications
Clear all

Mixing 2811 Pixel Types

2 Posts
2 Users
0 Reactions
1,209 Views
Posts: 212
Topic starter
(@myoung84)
Reputable Member
Joined: 12 years ago
[#35504]

Is it possible to mix 2811 pixels with different color orders with an e682 and Vixen 3? On my controller, I've got all 4 outputs on bank 1 wired to pixel strips with GBR color order. Bank 2 only has 2 outputs used, both pixel strips with GBR color order. Bank 3 will have all four outputs wired to pixel strings with RGB color order. Bank 4 is open and if it's possible, I plan to use it for a Renard controller. So, if I want to add more pixels with RGB color order, can those be added to bank 2 with GBR pixels already on it?

Here's a screen shot of my current plans for this year.

Capture2

1 Reply
jklingert
Posts: 1767
(@jklingert)
Noble Member
Joined: 16 years ago

Yes, but you are going to have to patch them manually in your sequencing software. The e682 assumes the data comes in RGB order and the setting in the controller just adjusts the channel order out to the pixels. In v3 you can manually patch each of the channels and color filters to match what you want to do. Just time consuming.


Reply
Share: