Mixed Up Universes ...
 
Notifications
Clear all

Mixed Up Universes On Multiple Controllers

11 Posts
8 Users
0 Reactions
3,982 Views
Posts: 347
Topic starter
(@dougd)
Reputable Member
Joined: 19 years ago
[#37750]

Not sure whether this has been discussed before. I have 6 682 controllers and 2 P12 controllers. All controllers will be used in unicast mode. Is there a downside to mixing up universes on all the controllers. IE.. controller 1 has universes 1,4,22,24,34,35,36,43,44,67. controller 2 has universes 3,11,12,13,29,30,39,40,41,78,79.

In years past controller 1 was universes 1-12, and so on. This year I am thinking about doing it different.


10 Replies
Posts: 74
(@rando1957)
Trusted Member
Joined: 13 years ago

Doug,
I know of no problem with mixing the universes around the controllers. I think the greater issue if you used the same universe on two different controllers.


Reply
Posts: 482
(@jcmarksafb)
Honorable Member
Joined: 15 years ago

Don't know why you would want to do that but there would be no problem with it. Just makes mapping a nightmare.
John


Reply
Posts: 347
Topic starter
(@dougd)
Reputable Member
Joined: 19 years ago

Well I normally don't map out my universes until I have everything setup up in the yard and hooked up to the controllers. This year I was trying to preconfigure what props were configured to what universe. Then when I set everything up it wouldn't matter which controller they were hooked to. I probably wont do it that way but figured I would explore the idea ahead of time.


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

Doug, you just like to look for trouble. This would be good discussion at the mini coming up.


Reply
Posts: 167
(@bigbenamerika)
Estimable Member
Joined: 13 years ago

As Long as you use different IPs you should be fine


Reply
Posts: 686
(@traneman)
Prominent Member
Joined: 16 years ago

arrrgh my head hurts...........lol


Reply
Jeff Millard
Posts: 1450
(@jeff-millard)
Noble Member
Joined: 19 years ago

Doug,

I have 4 E68x controllers and no two universes are in order. It will work just fine laid out as you describe. If I wasn't a good note taker, I wouldn't know what any of it does though...

Jeff


Reply
Posts: 347
Topic starter
(@dougd)
Reputable Member
Joined: 19 years ago

Good to know Jeff. I think I might try it this way this year. Each one of props on its own universe and pre-setup which universe each prop is using. Then just hook everything up and choose the universe for that controller that the prop is wired to.


Reply
Posts: 198
(@thevikester)
Estimable Member
Joined: 14 years ago

What software are you using Doug? I find with xlights, and it using natural sequential channels, and the 682's, with clusters, you have to account for the longest string in the cluster, which can get a little convoluted with the model numbering in xlights...the spreadsheet turned out to be a must for me, and having it done before hand, was mindnumbing enough.


Reply
Page 1 / 2
Share: