I am looking for some guidance as the tutorials and manuals arent quite covering my topic. I have an E682 working a 800pixel megatree and 90pixel star for a few years now, unfortunately I do notice LAG but thats topic for another day. I took a year off for medical issues and now dusting it all off I am a bit rusty all over again.
This year's issue is that I have added 4 strings of Roofline pixels and cant seem to get them hooked up right RE: Universe/channel assignment...I could use a little help from a seasoned VET. So far the system works outputting the same test patterns via the controller website, but when linking up and assigning through VIXEN I can not get them to cooperate. Here's where I'm at:
Megatree: 800px on Outputs 1.1 - 2.4
Star: 90px on Output 3.1
Roof & Garage C9: 41px, 91px, 67px and 100px on Outputs 4.1 - 4.4
So i have bounced around quite a bit and re-read the manual and still find myself stuck where the added roofline pixel strings creates a few variables for addressing correctly both in Hardware and Vixen Software:
1) San Devices can only assign 1 length of pixels to this group of outputs and said to use the largest, ie 100px.
Port 4-1: 41px,
Port 4-2: 92px,
Port 4-3: 67px,
Port 4-4: 100px.
When assigning these in Vixen it doesnt seem to jive with my setup because I would have a TON of extra channels being that I have (4) groups of 100px, but not in reality. I can get the software to act approriately but it wont actually connect to my lights when I try skip assigning the missing pixels within Vixen. When I dumb it down and assign them to my actual lengths of pixels I get undesired results both in Software and physical.
How do people handle missmatched string lengths with SAN DEVICES or within Vixen itself?
It has been awhile since I used a SanDevice but does a firmware upgrade help that? I can not remember what all was in the upgrade.
So after more poking around on the topic I saw some Firmware updates by JIM Here back in 2016 and updated the E682 firmware from 4.081 to 5.038 specifically covering this topic in the fineprint. I also found the video BY: Listen To Our Lights somewhere on here, followed it to the T and now have the new firmware uploaded on the controller. Also this updated procedure doc needs to be followed closely, as the wireless network needs to be disabled and both PC and Controller plugged into the router: San Devices - Update Procedure
Hopefully tomorrow I will bang out the new assignments and be on my way streaming ACN across the roofline, maybe even fix my LAG issue i've been having. I will update when possible, Thank you for the advice all around!
I think my problem was related to the variable length strings and only being able to select 1 length for the controller group #4, the workaround may have been skipping assignments but hopefully thats in the past now.
Updated Controller page after firmware update:
Thank you for the Heads Up, Mike! I ran into quite a few issues last night but I think im finally up and running...at least enough to get rolling for this season. I have a TON of "sequencing errors" on the controller, but its working still with a LAG. Next year I will plan ahead and prepare in the offseason, maybe get everything prepped and setup so I am good to go come Nov/Dec.
What Helped?
1) I put a camera in the front yard so I didnt have to keep going outside to see what happened after every little change, BEST MOVE YET!
2) Updated the E682 to latest firmware so that I could easily add my different length strings, considering the forum threads were from 2016 about that topic I was shaking my head! But happy to have found them, BIG THANKS to K-State for the nudge.
3) Learned the new firmwares ZIG ZAG function as the recent upgrade jammed up my megatree.
4) Added a few more Null pixels in-line to some of my longer runs as the new firmware test patterns weren't behaving properly. Might need some power injection too but thats for next year.
5) Correctly map the VIXEN software to the newly upgraded controller output assignments, easy now with new firmware....also helped keeping me from blowing a gasket over channels/universes/physical output correlations and where to troubleshoot.
6) Shortened up my Megatree Star in-line cable, as the pixels have been randomly sticking over years I now assumed it had to do with dataloss being hoisted 16' in the air. Chopped out a few feet of cable and noticed an improvement.
7) Wish I had more beer in the fridge to celebrate at 3am when it all came together....big regret. But still had a smile on my face.
Now on to sequencing and trying to figure out how you guys do all these cool designs from the Center out, up/down rooflines and whatnot. I figured it may be from grouping and/or zigzaging but I will need more time and beer to get it right. Is there such a thing as Christmas Lighting mentors? haha
Using the advice from another memeber on the forum, A2k97, I had changed the E682 access port on my router and suddenly a good portion of my noticable LAG in my display has disapeared. Scrolling megatree and swirl pattens look fluid again. Figured I would also post it in here given the qty of issues I needed to fix this season...









