Notifications
Clear all
Sep 05, 2017 9:41 am
Ok
Sent from my SM-N910T using Tapatalk
Sep 05, 2017 9:42 am
Thanks
Sent from my SM-N910T using Tapatalk
Sep 05, 2017 12:13 pm
The "spare" red and white wires really (really really really) need to be capped off or in some other way protected from shorting out. You're not going to like what happens if they short together. I agree with the above, your controller likely isn't putting out enough data for the second strip. Swap your two arches around, so the one that currently doesn't change color is connected to the controller first. That will give you a good idea on if it's 1) a mis-configured controller/software, 2) A bad connection between the 2 strings, 3) A blown IC.
Page 3 / 3
Prev
