Kulp K8-PB Operatin...
 
Notifications
Clear all

Kulp K8-PB Operating Temperature

7 Posts
3 Users
0 Reactions
1,348 Views
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago
[#55132]

This is my first year and wondering what the normal operating temperature should be for the controllers? Specifically I'm using a K8-PB at 12volts which according to the FPP Temp1 is 39C and Temp2 is 32C.

Are these temps normal? Just trying to discern whether or not I need a vent or a fan inside my controller box.
Thanks,
-Russ


6 Replies
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

My Kulp32 is running in the 20's. You seem to be running a little warm for northern hemisphere. Within spec, but warm. It's possible you might want more power injection to bypass the controller.


Reply
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago

Hmm I have the following being powered through the controller:

Roofline - 245 pixels power from the controller at pixel 1, but PI at the end.
RBL's - total of 60 pixels
Spinners - total of 60 RGB rectangular modules (180 pixels) power from controller at pixel 1, but PI at the end

The rest are powered by other PSU's. That doesn't seem like too much power running through the controller to cause higher temps?
In the same box, CG-1500, I do have 2 PSU's, the Kulp K8-PB, 2 distro boards, 2 Distro boards, USB hub, Wifi antenna and the Sound blaster 3. Maybe that's just too many devices generating heat and I should put a fan in there to cool things down.


Reply
Posts: 40
(@swanny)
Trusted Member
Joined: 6 years ago

I personally wouldn’t worry about it to much unless you start hitting the 45c range. Commercial grade components are generally rated to 70c ( that includes Meanwell Power Supply’s )

Sent from my iPhone using Tapatalk


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

I wouldn't worry about fans or cooling yet, either. My only concern is something electrical. If you're sharing with other warm components, then that's probably it.


Reply
Page 1 / 2
Share: