Is there a stand al...
 
Notifications
Clear all

Is there a stand alone pixel string controller

12 Posts
9 Users
0 Reactions
3,835 Views
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago
ErnieHorning wrote:Phil short is working on a pixel controller that accepts Renard commands. He’s also working on a mini board that can store a sequence and send out Renard commands. This would make a programmable stand-alone controller.

The Standalone Project uses a PICAXE microcontroller to send data to a second microcontroller to format it for the pixel string. The PICAXE doesn't actually store a sequence, rather it dynamically generates a 'sequence' in 'real time', using a user-created BASIC program that was written in a BASIC-like language and downloaded to the PICAXE. There are some spare pins on the PICAXE that could be used on some future version of the board to select from various 'sequences', if desired.

The parts are ordered and work hasn’t started yet, so it’s not available at the moment. If you’ve followed any of Phil’s projects before, you’ll also know that development can move along rather quickly and precisely. I don’t know what the priority is on this though as it’sonly just verbal right now.

The 'Standalone project' priority is just below supporting the Beta test for the Renard-PX1, above pretty much every other electronics or programming project.


Reply
Johnfish211
Posts: 404
Topic starter
(@johnfish211)
Reputable Member
Joined: 14 years ago

Phil Thank you for the feedback! I will watch wait and see what you come up with.


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
Johnfish211 wrote:I am working on a small project where I am going to put pixels in a wine bottle.

How many pixels, and do you want them equally spaced in a straight line, or randomly wound around (like a balled up string of incandescent lights)?

Does the power source also need to be inside the bottle, or you will run power lines in through the opening?

don


Reply
jklingert
Posts: 1767
(@jklingert)
Noble Member
Joined: 16 years ago

If you just want changing colors and don't want to sequence them, then you could use one of these LEDs. Just add a battery and resistor 🙂

They come in different sizes and colors, including ones that look like flickering flames.


Reply
komby
Posts: 871
(@komby)
Prominent Member
Joined: 14 years ago
Johnfish211 wrote:Thank you for the feedback. I am just in the idea stage at this point so I will make sure to follow Phils developement. I may take a shot at it with the arduino as well since I have been wanting to learn more about them. Ultimately I would like to have something that didnt require a pc to program but had the program already on board and a set of switches that could be set for the desired display. I am looking at them as gifts for technically challenged individuals. (like my family memebers LOL)

John

John if u are heading the arduino route you could use one of my rf1 boards with or without the rf. they are arduino compatible ,really small and cheap! and I have some example code with fade/rainbow etc.


Reply
Page 2 / 3
Share: