Introducing SmaLiC ...
 
Notifications
Clear all

Introducing SmaLiC — Smart Light Controller

6 Posts
2 Users
0 Reactions
754 Views
Posts: 6
Topic starter
(@dudeiot)
Active Member
Joined: 3 months ago
[#59177]

Hello DIYC community,

I’d like to share a project I’ve been working on called SmaLiC, a compact stand‑alone smart light controller designed for DIY lighting setups.
It can run full xLights sequences directly on the device, without needing a PC once the content is uploaded.

SmaLiC features:

  • 9 LED strip ports
  • 8 backlit touch‑sensor buttons
  • Built‑in 3W speaker
  • Web interface for configuration and playback
  • Local + cloud access
  • Web‑based firmware updates
  • 3D‑printed solution to build the 1st DIY light

If you’d like to see how it works, here are the links:

Demo page: https://www.dudeiot.com/demo/
YouTube channel: @DudeIoT?utm_source=copilot.com"> https://www.youtube.com/ @DudeIoT

I’d be happy to hear feedback from anyone interested in compact controllers or stand‑alone show hardware.

Thanks,
DudeIoT

BOARD 54.cleaned
intro A.cleaned
xLights A.cleaned
complete model A.cleaned

5 Replies
Posts: 6
Topic starter
(@dudeiot)
Active Member
Joined: 3 months ago

I’ve added DDP (Distributed Display Protocol) support to SmaLiC, making it possible to integrate SmaLiC‑based indoor light setups into large outdoor xLights Christmas shows. During the holidays, your indoor lights can run as part of the synchronized outdoor display, and after the season ends, SmaLiC continues to function as a regular stand‑alone smart light.
Best regards,
DudeIoT


Reply
Posts: 849
(@tfischer)
Prominent Member
Joined: 17 years ago

I see a lot of marketing lingo but not much in the way of tech specs.

"9 LED strip ports": What's an "LED strip port? WS281x? Xconnect? Dumb RGB?
"8 backlit touch‑sensor buttons": For what?
"Local + cloud access": Again, for what? What type of cloud? Free? Subscription?
"3D‑printed solution to build the 1st DIY light": I don't know what this means, 'to build the first light'. The controller enclosure? An enclosure for an LED you attach to this? Why just "the first" light?

I also don't see any kind of pricing information.

You have found yourself in a group called "doityourselfchristmas", and the DIY means a lot of folks here are hardware engineers that have rolled their own controllers. We're less motivated by glossy marketing and much more motivated by cool tech specs and new ideas for hardware.

Not trying to diss your device, I just don't understand what it is or who its meant for.


Reply
Posts: 6
Topic starter
(@dudeiot)
Active Member
Joined: 3 months ago

Thanks for the questions — here’s a clearer explanation.
And sorry if my explanations feel too detailed — I just want to be precise.

SmaLiC is not a replacement for Falcon controllers or WLED.
It’s a standalone LED device designed for small to medium lighting projects where a full FPP setup is overkill and WLED doesn’t provide enough functionality for structured, appliance-style lighting.

The main idea behind SmaLiC is visibility and direct user control.
It’s meant to be a device you can mount on a wall or place on a table, with 8 backlit touch-sensor buttons for immediate hands-on interaction, plus a built-in Web GUI for remote operation.

In other words, it’s designed to be a self-contained LED appliance, not just another hidden controller box.

It can also be part of a larger FPP-based show if needed.
But outside the holiday season, it’s intended to function as regular everyday lighting — something you can use year-round.

The main goal is to provide a user-friendly controller that makes it easy to build modern lighting with minimal effort.

>9 LED strip ports": What's an "LED strip port? WS281x? Xconnect? Dumb RGB?

They are outputs for LED addressable strips or matrices. Supported types include: WS2812B, SK6812, etc.
8 physical ports can be configured to support "virtual multi-strip props" like MATRIX, ICICLE, etc.

>"8 backlit touch-sensor buttons": For what?
Each button can trigger a unique lighting scenario (total 8 scenarios) , such as:
- starting/stopping a music-synchronized pre-timed sequence
- selecting brightness or color presets
The idea is to make the device usable without a phone, PC, or app — something you can walk up to and control instantly.

> "Local + cloud access": Again, for what? What type of cloud? Free? Subscription?
Local access means you can connect to a built-in WEB server from your phone, PC, tablet, etc. on your local Wi-Fi network.
and control it locally to have the max privacy.
Cloud access (it can be disabled for privacy) allows to control the device through Internet logging to your device
on www.dudeiot.comover the secured connection.
Additionally, the cloud access allows to upgrade the software/firmware over WEB interface.
It's free. No subscription.

> "3D-printed solution to build the 1st DIY light": I don't know what this means, 'to build the first light'. The controller enclosure? An enclosure for an LED you attach to this? Why just "the first" light?

To demonstrate the capabilities of the SmaLiC, I built a wall-mounted DIY Light using 10 addressable LED strips (600+8 pixels total).
This is a demo project only — not for sale — and simply shows what can be built with the controller.
It’s not “the first light” in a product line — it’s just the first example build that demonstrates how the controller can be used in a real installation.

I created a complete 3D-printed enclosure for this demo light.
There is a comprehensive video guide that covers every step of the DIY Light assembly, from hardware preparation to final installation.
All 3D-printed enclosure files are available free on printables.com , and a full Bill Of Materials is provided if you want to build your own version.
More information on the SmaLiC can be obtained from Demo Page and @DudeIoT">YouTube.

>I also don't see any kind of pricing information.
About pricing — I haven’t finalized anything yet.

SmaLiC is still in the prototype / testing stage, so I haven’t set an official price.
However, I do have about 10 kits assembled, and I may sell them to early testers who want to try the device and provide feedback.

Right now I’m mainly sharing the project to gather input from the community and show what the board can do.
Once I get more feedback and confirm the design is stable, I’ll be able to determine realistic production costs and decide on broader availability.

Please let me know what technical details you’d like to know. I’m happy to provide specifics about the hardware, pixel outputs, power handling, performance limits, or anything else you’re curious about.

Thanks
DudeIoT


Reply
Posts: 849
(@tfischer)
Prominent Member
Joined: 17 years ago

Thanks for the info!


Reply
Posts: 6
Topic starter
(@dudeiot)
Active Member
Joined: 3 months ago

I’m working on kitchen under‑cabinet light powered bySmaLiC, and I’ve finished designing the 3D enclosure for it.
The device uses a 16×8 LED matrix behind a 200×200 mm black acrylic sheet, which gives a smooth diffused look with no hotspots.
The enclosure is designed to hold:

  • the LED matrix
  • the acrylic diffuser
  • the SmaLiC controller
  • touch‑sensor buttons

This is still the CAD model — printing and assembly come next.
YouTube video


Reply
Share: