I got one of the 4 output controllers and blew I ordered another and can't get it to work. Now I am liking for a new controller to replace it. Problem I have that Italian disease mefundsalow ( me funds are low)but I would love to get to use the pixel tree I built for this years show. Any suggestions on with I can still get in time and not going to cost me a lot of money
The tree is a 180 deg 10 rows of 45 ws2811 pixels 12v
A couple pixel-sticks could easily handle your tree. What part of the world are you in? Amazon works well in US.
Sent from my XT1254 using Tapatalk
450 pixels is nothing. You can do that with one output off pretty much any controller. One ESPixelstick, an output of a Pi, etc...
AJVenti wrote:I got one of the 4 output controllers and blew I ordered another and can't get it to work. Now I am liking for a new controller to replace it. Problem I have that Italian disease mefundsalow ( me funds are low)but I would love to get to use the pixel tree I built for this years show. Any suggestions on with I can still get in time and not going to cost me a lot of moneyThe tree is a 180 deg 10 rows of 45 ws2811 pixels 12v
What problem are you having with the second 4 output controller?
At first one of the ethernet boards did not light up. I had another one so I replaced it and when I connected a set of lights and pushed the test button nothing happened. The red light is blinking, I did try to put some data to it still nothing. If I can’t get this thing to work I do have two pixel extender that I could uses if you think it will work I am just not sure how to setup them up for a pixel tree in vixen
I still use pixel extenders on my Bridge and they work great. I have one running around 500 pixels.
On the 4 output controller:
-are you running 5v or 12 pixels?
-Are you powering the board from a separate 5v power supply?
-Any pics of the board soldered up so we can have a look?
-The red light is a good sign as that means the board is working (normal operation).
I am running 12v pixels
using a 5v 03apower supply for the board
I will get pic of board to send
Did have problem installing the D4 and D3 terminals ( think I can fix these) But they are for hooking up pixels so if I am right terminals D1 and D2 should still work
I did go back and re-soldered all the connections
