So I have a Sandevices E682 and am trying to setup 4 large mini trees and 3 small mini trees. The large mini trees are 85 nodes with a 20 node star on top for a total of 105 nodes and the small mini trees are 50 nodes with a 20 node star for a total of 70 nodes. I have done some testing and everything is working great but I need to get some help on how to setup all of the trees on the controller and in Vixen. I am familiar with the process but wanted to get an expert opinion so I don’t create more work for myself when setting up universes and things. I believe that the controller is capable of handling my setup but let me know if my math is wrong.
The world is yours. You can run them all off one port or off 7 different ports. I am certainly no expert but would split them up. That way if you run into a problem it’s easier to troubleshoot. I’d put each tree on its own.
I am going to run them off different ports. I am just unsure about setting up the universes. Would you put all of the large minitrees with 105 pixels in 1-1 to 1-4 and all of the small minitrees with 70 pixels in 2-1 to 2-3? If you do it this way, I assume I will just let the controller software tell me which universes and starting to channels to use and go from there? This seems like the most logical way to do it but I just want to make sure I am not missing something important.
It’s a matter of personal preference. Some people like to leave open channels for future expansion. Your 4 bigger trees are 1560 channels so just over 3 universes. You could carry right over or leave the channels open and start the smaller trees in universe 4.
I have a question :), if for example the wire for the data between the mini-tree 3 and the mini-tree 4 is 5 to 6 meters long does everything would work properly?
I do something similar just that every tree will have 150pixel and I didn't had time to mount them and I'm thinking that I will have some problems here.
