First pixel tree wi...
 
Notifications
Clear all

First pixel tree wiring help

4 Posts
4 Users
0 Reactions
2,082 Views
Posts: 10
Topic starter
(@snowmandan)
Eminent Member
Joined: 11 years ago
[#40773]

The more I read the more confused I get. I am using vixen 3 and sandevice 682 controller my tree is 16 strings of 50 pixels
I was going to put 100 pixels per output if I wanted to put the controller more then 10 feet away I would need 8 pixel exstenders
Is their a better way to do this power will be at the tree.


3 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

I actually think you can get away with the controller being up too around 20' then you need too start with null pixels so if you have a controller say 25' you may need 1 null pixel inline for each string


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

16 strings, 16 outputs. I'd say put the controller under the tree. If you need to drive other pixels invest in another controller, e6804 maybe.


Reply
JCook
Posts: 1003
(@jcook)
Noble Member
Joined: 13 years ago

I use a E682 myself, actually 6 of them. I wouldn't push the length of your first pixel to 20', I did and it worked ok for awhile then lots of flickering. to be safe put a null pixel at 10'. I have some at 17' that are ok. I used quality 18 ga SOJW cord too.


Reply
Share: