Falcon Vs E-682 for...
 
Notifications
Clear all

Falcon Vs E-682 for a mega tree

12 Posts
10 Users
0 Reactions
9,770 Views
Posts: 230
Topic starter
(@oldandslow)
Reputable Member
Joined: 16 years ago
[#50497]

Which would be easier to use for a 16 string 100 pixels per string mega tree? Falcon f/3 or e-682?
John


11 Replies
Deacon
Posts: 151
(@deacon)
Estimable Member
Joined: 13 years ago
oldandslow wrote:Which would be easier to use for a 16 string 100 pixels per string mega tree? Falcon f/3 or e-682?
John

Both would be similar or the same in terms of being easy to use. Both the E682 and Falcon F16v3 are 16 port controllers, although the Falcon has the ability to add on an expansion board to make it 32 ports. I personally would go with Falcon F16v3 or maybe even the F48 if that met your needs.

Theres a great website that has a controller comparison outlining all the details of the major controllers out there (A little outdated in controller versions but will still give you a good idea of the capabilities and limitations):
http://nutcracker123.com/nutcracker/rgb_controllers/

I started with San Device E6804/E682 controllers, then bought a Falcon F4v3 and I have all Falcon controllers currently. They are rock solid, would never think about using anything else at this point on.


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

you will get a lot of different answers on this we have several boards that can run a mega tree and are pretty much just as easy as each other some would say to go for the cheapest so you have cash for other things some would say buy the one that does the most pixels for future expansions I myself have had many different controllers controlling my tree over the past 5 yrs and they all worked great


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Lots of opinions. Easier? They are all about the same as far as hooking things up. I feel the Falcons are simpler to configure and have a much wider array of configuration options (that have saved my butt multiple times) than the 682 controllers. I vote Falcon. 🙂


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Falcon is a much more robust controller, more feature filled, and has the best customer service by far.


Reply
cnbales
Posts: 503
(@cnbales)
Honorable Member
Joined: 15 years ago

Hands down, Falcon. I have owned both controllers.


Reply
Posts: 1168
(@keith-r)
Noble Member
Joined: 19 years ago

If all you plan to do is 16 x 100 nodes, and you are good with soldering, I would go with the e682 because the 109.00 plus shipping is hard to beat. If you want an already built controller, that is expandable to 32 ports (including receiver boards), then go with the F16v3. I have 3 e682's that have served me well since 2014. The F16 can output more pixels per port, so with power injection, you could use less ports.
I just picked up another e682 because all I was going to run off of it was WS2811's (I didn't need any extra horsepower).
The F16v2's are also expandable and you might pick one up for less if someone is looking to upgrade.

Edit: Actually, I think the F16v3 is expandable to 48 ports...


Reply
Posts: 409
(@dim-bulb)
Reputable Member
Joined: 9 years ago

I started with an E682 now have a Falcon, only thing i liked more about the E682 was the test patters.


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

If you value price, then E682.
If you think you are going to need flexibility and expandability, Falcon F16Vx.


Reply
Posts: 173
(@smerk)
Estimable Member
Joined: 10 years ago

I have 7 682s. I built 2 and bought 4 of the others used. And the 7th was a throw in because it didn't work but I fixed it. I paid roughly $800 for all 7.
For a 16x100 tree it would be a piece of cake to set up with either. That was the original question. Certainly cheaper with the 682.
I would personally use 12v pixels and drive 200 per ports 1-8. This would leave ports 9-16 for other props like a star.


Reply
Page 1 / 2
Share: