F48 Differential Co...
 
Notifications
Clear all

F48 Differential Controller - n00b Question

41 Posts
16 Users
0 Reactions
39.4 K Views
Posts: 7
Topic starter
(@beedish)
Active Member
Joined: 9 years ago
[#48167]

I’ll be attempting my first show this coming Christmas, and I’m currently in the planning stages. I’ve made it to the “controller” stage and was looking around at all the options. I noticed a new F48 Differential Controller available from Falcon and was curious if anyone could expand into the *basic* functionality of that board. The way I’m looking at it (novicely, mind you), is that’s its an E1.31 board that uses, what I assume to be Cat6 cables at the board outputs to the pixels. I’m also making the assumption (if my previous assumption is correct) that this is to help have a central controller since the Cat6 will allow you further runs to the start of your pixels.

Am I anywhere close to describing what this board does, or do I have an exceptional amount of reading to do before I select a controller?

Edit: Link for clarity https://www.pixelcontroller.com/store/index.php?id_product=52&controller=product


40 Replies
Posts: 98
(@davedecali)
Estimable Member
Joined: 10 years ago

This board would pair with the receiver boards that will have a total of 4 outputs per board and what someone else stated in a sense you would have the equivalent of 12 FV4 controllers with this one controller (which is awesome) and will fit the bill for a lot of our setups that spread at decent distances.

Sent from my iPhone using Tapatalk


Reply
Posts: 7
Topic starter
(@beedish)
Active Member
Joined: 9 years ago

Gotcha! I delved into the spec sheet and realized this isn’t like the f16v3. Now it makes a bit more sense. Saw the Ethernet lines and got confused. So it’s basically a controller for other smaller controllers?


Reply
Posts: 7
Topic starter
(@beedish)
Active Member
Joined: 9 years ago

It appears this is WELLLLLL beyond my current needs. I’ll probably end up with somewhere in the neighborhood of 3000-4000 pixels all said and done. No need for this....YET!


Reply
Posts: 98
(@davedecali)
Estimable Member
Joined: 10 years ago

I think a f4v3 would be perfect for you... and if needed an expansion board that would allow you to run more outputs. Or the smaller differential board to 4 receivers but still plenty of flexibility.

Sent from my iPhone using Tapatalk


Reply
Page 1 / 9
Share: