ESPPpixelStick to D...
 
Notifications
Clear all

ESPPpixelStick to DMX

39 Posts
4 Users
2 Reactions
5,445 Views
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago
[#58597]

I need DMX source for this year only so I can give my Mega Tree one last fling this year before replacing it with a Pixel based tree.
Does the ESPPixelStick work on a the WT32-ETH01?
Is there a tutorial of getting started if ESPPixelStick?


38 Replies
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Yes it supports that horrible platform and yes it outputs DMX data.you can get the latest at github or the web flasher.


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago

Thanks,
I understand the comments about the platform, however I have found they work well if they have sufficient power.


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago

Not sure what I did wrong. I got a installation Failed message - You ESP board is not supported.


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago

Problem Fixed. I changed to Platform option to WS32-ETO01


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago

I got a Installation failed - No serial data received.


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago
Matt_Edwards wrote:
I got a Installation failed - No serial data received.

Try try again. this time success


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago

Wow. ESPPixelStick is awesome.
WLED doesn't allow 2 different IP address (1x Wifi & 1x ethernet)

1742529812384

Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago

When using the WT32-ETH01, is there a way to change the GPIO pins?


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago
Matt_Edwards wrote:
When using the WT32-ETH01, is there a way to change the GPIO pins?

Found it, I turned on Advance Mode in Admin


Reply
Page 1 / 4
Share: