Is there somewhere a high-level description of the various espixelstick hardware and firmware 'products' and how they relate to each other?
They all for the most part use the same firmware, really only difference is the design. I have used ones from Jboards and from Artstik, liked them both
dim bulb wrote:They all for the most part use the same firmware, really only difference is the design. I have used ones from Jboards and from Artstik, liked them both
That was not very helpful. When I look at Shelby's site I see mention of several different boards (some using ESP8266-01 and at least one using the Wemos D1 Mini), and I see references to several different versions of the firmware. Not having followed the developments over the years, I'm unclear on the differences between the various items, particularly the firmware.
Hi Phil
The esp-01 has a limited usage as it is a single gpio via Espixelstick firmware 3.x. and earlier
I believe the esp 8266 Wemos D1 etc are a single gpio usage also .3.x and earlier
The Esp32 and ver 4 firmware is the way to go as it make use of more gpio ,SD ,relays, servos etc.
This firmware is very advanced and works with several Esp32 variants.
Mostly I was looking to see if there was overlap with something that I'm working on. Basically I have a scheme that I've verified with an oscilloscope that would provide for up to 4 gpio (and maybe more) with the ESP8266, although it would be limited to WS2811 only and would use raw UDP datagrams for inputting data (no web server, either). This would be for my own use, although I'm likely to switch to communicating with 10BT using ENC28J60 controllers.
In any case, what are the available ESP32 controller boards?
