Espixelstick Unify ...
 
Notifications
Clear all

Espixelstick Unify for esp32

33 Posts
7 Users
0 Reactions
7,816 Views
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago
[#53164]

Well I thought I would give this another go and presto what do you know .

This looks very good Martin !

Martin ESP32

32 Replies
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Thanks Angus


Reply
Posts: 5
(@mikel1489)
Active Member
Joined: 6 years ago

Is this available for use or for testing?


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Yes. I have three people trying to test. Things look pretty stable so I would love to expand the number of people testing.


Reply
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago

Good stuff Martin!

I have successfully loaded your firmware onto the Esp32 Dev module and the
Esp32 wemos D1 .

Though I still have not connected output all went extremely smooth with the exception of the Wemos . for some reason it will boot to AP and not connect with DHCP.
If I assign the Wemos a static ip all is well .

Nothing changed in the sketch but the selected board .
suggestion ?
Note: Resolution found for the D1

HW-665 is not necessarily the Wemos D1 but rather a variant. I reflashed with a board selection ->MH ET LIVE ESP32 MiniKit .
This booted right in to DHCP .
Now I can move to testing , 🙂
Thanks again .


Reply
Page 1 / 7
Share: