ESPixelstick playin...
 
Notifications
Clear all

ESPixelstick playing sequence without FPP?

39 Posts
9 Users
0 Reactions
13.1 K Views
Posts: 339
Topic starter
(@heldwhat-christmas)
Reputable Member
Joined: 15 years ago
[#54190]

I built the Navy coro prop from Boscoyo for my dad that I'm lighting using an ESPixelstick and I thought I had seen last year there were plans to update the ESPixelstick to be able to run sequences on startup instead of requiring FPP or something similar. I don't see the option in 3.2, or on the list of things added in 4.0. I thought this would keep the setup super simple for my dad.

Does anyone know if that ever happened or if I'm misremembering? If I can't do it with an ESPixelstick, any other suggestions? I could wire up a Pi Zero with FPP on to the prop, but that just seems like overkill...

Thanks!


38 Replies
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
Heldwhat Christmas wrote:I built the Navy coro prop from Boscoyo for my dad that I'm lighting using an ESPixelstick and I thought I had seen last year there were plans to update the ESPixelstick to be able to run sequences on startup instead of requiring FPP or something similar. I don't see the option in 3.2, or on the list of things added in 4.0. I thought this would keep the setup super simple for my dad.

Does anyone know if that ever happened or if I'm misremembering? If I can't do it with an ESPixelstick, any other suggestions? I could wire up a Pi Zero with FPP on to the prop, but that just seems like overkill...

Thanks!

It did happen, but you need to use Shelby’s ESPixelStick V3. It has a provision for a microSD which holds the sequence files Can not be done on just any ESP device

Edit: ESP Flash Tool TRAVIS-CI
https://github.com/forkineye/ESPixelStick/releases/tag/untagged-f4320d775cca4506ccfb
seems to work fine with V3 hardware, but code is still beta, and does not work an pre V3 style ESP devices


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
mrGrumpy wrote:It did happen, but you need to use Shelby’s ESPixelStick V3. It has a provision for a microSD which holds the sequence files Can not be done on just any ESP device

I believe one of these will work with Esp32 Lonlin Pro.

https://github.com/forkineye/ESPixelStick/tree/unify
https://github.com/MartinMueller2003/ESPixelStick/tree/unify


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

espixelstick V4 software runs on V3 hardware and supports playing fseq files from an sd card inserted into the v3 base card. the sw can also be installed on the lolin pro cards which have sd card holders.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

yes the v4 software runs on an esp32 platform. esp32 adds a 2nd output for pixels


Reply
Page 1 / 8
Share: