ESPixelstick not wo...
 
Notifications
Clear all

ESPixelstick not working with FPP multisync

12 Posts
2 Users
0 Reactions
1,421 Views
Posts: 133
Topic starter
(@mel4853)
Estimable Member
Joined: 19 years ago
[#58369]

The controllers are working directly with Xlights.
1. I loaded all the files on to the SD cards of controllers. Did all of this with Filezilla, FPP connect doesn't load the full sequence all of the time. (V2/uncompressed)
2. I loaded FPP from Xlights with FPP connect. (V2/uncompressed)
3. All my controllers show up in FPP multisync
4. When I play a sequence from FPP, the multisync tab says it is playing to all controllers and all the controllers say they are receiving sync packets from FPP.


11 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

On the admin screen, click the advanced box. Go to the status screen. Is there an error being reported?


Reply
Posts: 133
Topic starter
(@mel4853)
Estimable Member
Joined: 19 years ago

I attached a screen shot of FPP and ESPixelstick.

FPP
Home screen

Reply
Posts: 133
Topic starter
(@mel4853)
Estimable Member
Joined: 19 years ago

Is anyone else using Xlights and loading sequences to their SD Card? If so how are you doing it? There is a fseqfilelist file that is generated by Xlights that is on the SD Card that I see when I do load sequences from Xlights. All the sequence files size stated in here are too small and are too small to play. They will produce errors in ESPixelstick home page stating they can't play because they're too small.


Reply
Posts: 133
Topic starter
(@mel4853)
Estimable Member
Joined: 19 years ago

Got it figured out, I was playing a playlist that only had my matrix test sequence in it. But I still do have a problem, through FPP my matrix isn't working or is blinking pixels to something. I'm not sure what that something is but they should be scrolling text. If I run this directly from Xlights it works. I've attached the matrix layout from Xlights and the pixel overlay model in FPP. I've also attached the Device Setup page from the ESPixelstick.

Matrix Layout
FPP Pixel Overlay Model
Matrix ESPixelstick

Reply
Page 1 / 3
Share: